Translation of "distance de décollage avec tous les moteurs opérants " (French → English) :

87. A ship on which a remote steering gear control system or a steering gear power unit is fitted shall have permanently displayed, on its navigating bridge and in its steering gear compartment, if any, simple, brief operating instructions and a block diagram showing the changeover procedures for the system or unit.

In this way, all long-distance carriers would find the most appropriate framework to counter the competition of low-cost airlines, be it by appropriate pricing strategies or by proposing innovative and better performing services.

(a) An operator shall ensure that the take-off flight path of aeroplanes with two or more engines, determined in accordance with this sub-paragraph, clears all obstacles by a vertical margin of at least 50 ft, or by a horizontal distance of at least 90 m plus 0·125 x D, where D is the horizontal distance travelled by the aeroplane from the end of the take-off distance available or the end of the take-off distance if a turn is scheduled before the end of the take-off distance available except as provided in sub-paragraphs (b) and (c) b ...[+++]elow.

(a) An operator shall ensure that the take-off flight path with one engine inoperative clears all obstacles by a vertical distance of at least 50 ft plus 0·01 x D, or by a horizontal distance of at least 90 m plus 0·125 x D, where D is the horizontal distance the aeroplane has travelled from the end of the take-off distance available.

(b) The terms "accelerate-stop distance", "take-off distance", "take-off run", "net take-off flight path", "one engine inoperative en-route net flight path" and "two engines inoperative en-route net flight path" as relating to the aeroplane have their meanings defined in the airworthiness requirements under which the aeroplane was certificated, or as specified by the Authority if it finds that definition inadequate for showing compliance with the performance operating limitations.

Q-240 — Mr. Jaffer (Edmonton—Strathcona) — With regard to ports of entry into Canada: (a) what are the standards used by all customs officers across Canada to determine a high-risk traveller or shipment, and what is the standard procedure as to what to do with such a traveller or shipment once it is determined to be high-risk; (b) under what standard procedure are customs officers expected to refer travellers to immigration officers, and is there any standard for immigration officers to notify customs officers as to the results of such referrals; if it is determined that a traveller should be referred to an Immigration officer and there is no immigration officer at that location, what is the standard procedure that a customs officer shoul ...[+++]d follow; (c) why are there no joint Citizenship and Immigration Canada (CIC) and Canada Customs and Revenue Agency (CCRA) evaluations planned to determine the effectiveness of customs officers and immigration officers at the border; (d) is there a standard for the sharing of data and intelligence between customs officers and immigration officers; (e) is there a standard referral procedure by which customs officers can clearly determine by which points should a traveller be referred to immigration officers; (f) is there an agreement between the CCRA and CIC that would provide for periodic evaluations to be performed jointly by CCRA and CIC to determine the effectiveness of their joint operations; (g) what percentage of the time does the Primary Automated Lookout System-Highway equipment correctly read licence plates of vehicles stopped at border crossing booths; (h) what facilities exist for examining commercial shipments at the Ambassador Bridge in Windsor and where are they located in relation to the bridge customs site: (i) what is the standard procedure for ensuring that truck operators told to report to the facility actually arrive there; and (ii) under what circumstances would procedures dictate that a truck be escort ...