Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Halation
Reflected-light halation
Reflecting material
Reflective material
Reflex halation
Reflex reflection
Reflex reflector
Reflex-reflective device
Reflex-reflective material
Retro-reflecting material
Retro-reflection
Sound-reflecting material

Traduction de «reflex-reflective material » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous


reflecting material [ reflective material | sound-reflecting material ]

matériau réfléchissant


reflex reflection | retro-reflection

flexion catadioptrique | rétroréflexion


reflex reflection | retro-reflection

réflexion catadioptrique


reflex reflector | reflex-reflective device

catadioptre


retro-reflection | reflex reflection

rétroflexion | réflexion catadioptrique


reflective material

tissu réflectorisant [ étoffe réflectorisante ]


retro-reflecting material

matière rétroréfléchissante


halation [ reflex halation | reflected-light halation ]

halo [ halo de réflexion ]
TRADUCTIONS EN CONTEXTE
(ii) reflex reflectors that have a minimum area, as projected in side elevation, of 100 cm and that are composed of Class 1 or 3 reflective materials, as specified in Canadian General Standards Board Standard CGSB 62-GP-11M, Marking Material, Retroreflective Enclosed Lens, Adhesive Backing (May 1978), of any colour or combination of colours set out in Table 1 of that Standard and with a reflective intensity value of Level 1 as specified in Table 2 of that Standard.

(ii) soit des cataphotes qui couvrent une superficie minimale de 100 cm , projetée en élévation latérale, et qui sont faits d’un matériau réfléchissant de catégorie 1 ou 3 selon la norme ONGC 62-GP-11M de l’Office des normes générales du Canada, intitulée Réflecteurs à microbilles de verre incorporées des adhésif (mai 1978), d’une couleur ou combinaison de couleurs prévues au tableau 1 de cette norme et d’une intensité réflectrice du niveau 1 selon le tableau 2 de cette norme.


(10) If reflective material referred to in S5.1.1.4 of TSD 108 is applied to a non-vertical surface, the entrance angle used to demonstrate that the material conforms to the performance standards prescribed by that section shall be the sum of the entrance angle specified in Table 1 or Table 1A of SAE Standard J594f, Reflex Reflectors (January 1977), and the angle, measured on the horizontal centreline of the material, by which the material deviates from the vertical.

(10) Lorsqu’un matériau réfléchissant visé à la disposition S5.1.1.4 du DNT 108 est installé sur une surface non verticale, l’angle d’éclairage utilisé pour démontrer la conformité du matériau avec les normes d’efficacité prévues à cette disposition doit être est égal à la somme de l’angle d’éclairage spécifié aux tableaux 1 ou 1A de la norme J594f de la SAE, intitulée Reflex Reflectors (janvier 1977), et de l’angle, mesuré sur l’axe horizontal du matériau, entre la verticale et le matériau.




datacenter (1): www.wordscope.ca (v4.0.br)

'reflex-reflective material' ->

Date index: 2023-02-13
w