Traduction de «verify » (Anglais → Français) :

verify visitor's identification | verifying visitor identification | confirm visitor identification | verify visitor identification

country verifying certification authority [ CVCA | country verifying CA ]

key verify | key-verify

check practicality | verify usefulness | verify feasibility | verify if feasible

verification of distillation safety | verifying distillation safety | distillation safety verifying | verify distillation safety

punched tape verifier | tape verifier

card verifier | punched card verifier

accredited environment verifier | accredited environmental auditor | accredited environmental verifier

card verifier [ punched card verifier ]

punch-verifier [ keypunch-verifier ]

EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32008R0692 - EN - Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) - COMMISSION REGULATION - (EC) No 692/2008 // of 18 July 2008 // implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to ve ...[+++]hicle repair and maintenance information // ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL // Appendix 1 // Verification of conformity of production — First statistical method // Appendix 2 // Verification of conformity of production — Second statistical method // Appendix 3 // MODEL // INFORMATION DOCUMENT No . // Appendix to information document // INFORMATION ON TEST CONDITIONS // Appendix 4 // MODEL OF EC TYPE-APPROVAL CERTIFICATE // (Maximum format: A4 (210 × 297 mm)) // Addendum to EC type-approval certificate No . // concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007 // Appendix 5 // Vehicle OBD information // Appendix 6 // EC Type –Approval Certification Numbering System // Appendix 7 // IN-SERVICE CONFORMITY // IN-SERVICE CONFORMITY CHECK // STATISTICAL PROCEDURE FOR IN-SERVICE CONFORMITY TESTING // RESPONSIBILITIES FOR IN-SERVICE CONFORMITY // VERIFYING AVERAGE EXHAUST EMISSIONS AT AMBIENT CONDITIONS // (TYPE 1 TEST) // EMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES // MEASURING CARBON MONOXIDE EMISSION AT IDLING SPEEDS // (TYPE 2 TEST) // MEASUREMENT OF SMOKE OPACITY // VERIFYING EMISSI ...

14. Considers that the upcoming review of the type-approval framework directive must expand and specify the requirements for conformity of production so as to ensure that a sufficient and representative sample of new models, taken at random off the production lines, is tested annually using RDE tests to verify compliance with European pollutant and CO2 limit values; calls furthermore for improved in-service testing of vehicles already in use on the road – likewise on the basis of the RDE procedure – in order to verify in-service conformity of vehicles at different mileages as required under the Regulation; calls for an improvement of o ...[+++]n-road surveillance through periodic technical inspections to identify and repair vehicles which are found not to be in compliance with EU law;

22. Acknowledges that since 2012, the Agency's "Verifying Office" performs ex ante checks focused on valuable commitments, sensitive contracts and complex procurement procedures where higher risks have been identified; notes that during 2013, no delays have been reported by the “Verifying Office” and that all transactions were checked using checklists in line with the financial regulations and the charter of the verifying officer;

22. Acknowledges that since 2012, the Agency's "Verifying Office" performs ex ante checks focused on valuable commitments, sensitive contracts and complex procurement procedures where higher risks have been identified; notes that during 2013, no delays have been reported by the “Verifying Office” and that all transactions were checked using checklists in line with the financial regulations and the charter of the verifying officer;