Traduction de «condition d'homologation cee » (Français → Anglais) :

setting up a security accreditation process, in accordance with the relevant policies, clearly stating the approval conditions for the CIS under its authority.

1. Manufacturers or their agents shall submit an application for EU approval of a type of vehicle unit, weight sensor, motion sensor, model record sheet, tachograph card or software used by the competent control authorities to interpret data, to the type approval authorities designated to that effect by each Member State and whose certification conditions are recognised by the management committee of the Senior Official Group on Information Security (SOG-IS) within the framework of the European mutual recognition agreement.

(4) It is desirable to take into account the technical requirements adopted by the UN Economic Commission for Europe in its Regulation No 30 (‘Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers’), as amended , in its Regulation No 54 (‘Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers’) , in its Regulation No 64 (‘Uniform provisions concerning the approval of vehicles equipped with temporary-use spare wheels/tyres’), as amended , and in its Regulation No 117 (‘Uniform Provisions Concerning the Approval Of Tyres With Regard To Rolling S ...[+++]ound Emissions And To Adhesion On Wet Surfaces’), as amended , which are annexed to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions (Revised 1958 Agreement) .

(4) It is desirable to take into account the technical requirements adopted by the UN Economic Commission for Europe in its Regulation No 30 (‘Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers’), as amended , in its Regulation No 54 (‘Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers’) , in its Regulation No 64 (‘Uniform provisions concerning the approval of vehicles equipped with temporary-use spare wheels/tyres’), as amended , and in its Regulation No 117 (‘Uniform Provisions Concerning the Approval Of Tyres With Regard To Rolling S ...[+++]ound Emissions And To Adhesion On Wet Surfaces’), as amended , which are annexed to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions (Revised 1958 Agreement) .

In particular, the Commission should be empowered to establish the specific procedures, tests and requirements for the type-approval of motor vehicles, components and separate technical units; to define more precisely the characteristics a tyre must fulfil to be defined as ‘special use tyre’, ‘off-road professional tyre’, ‘reinforced tyre’, ‘extra load tyre’, ‘snow tyre’, ‘T-type temporary-use spare tyre’ or ‘traction tyre’; to set out specific safety requirements for vehicles intended for the transport of dangerous goods by road within or between Member States; to exempt certain vehicles or classes of vehicles of categories M, M, N and N from the obligation to instal ...[+++]l advanced emergency braking systems and/or lane departure warning systems; to amend the limit values on rolling resistance and rolling noise for tyres as a result of changes in test procedures without lowering the level of protection of the environment; to establish rules on the procedure for the determination of noise levels of tyres; to shorten the sell-off period for tyres not complying with the requirements set out in this Regulation and its implementing measures; and to amend Annex IV to include the Regulations of the United Nations Economic Commission for Europe (UNECE Regulations) which are mandatory under Council Decision 97/836/EC of 27 November 1997 with a view to accession by the European Community to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions .

10a. This regulation shall be without prejudice to any EC type-approval granted to vehicles, components or separate technical units before the date referred to in paragraph 1 and shall not prevent the extension of such approvals under the terms of the Directive under which they were originally granted.