Traduction de «côté droit d'un brise-balle mélangeur » (Français → Anglais) :

left side of a balle opener

THENCE, from the point of beginning, so determined, westerly, along the said original Centre Line as shown by a broken white line on the accompanying plan seven hundred and seventy-eight (778) feet, more or less, to a point on the prolongation across the Railway right-of-way of the boundary line between land formerly of Mrs. John Robblee, now of Her Majesty the Queen in right of Canada, and that of Vernon Clarke, lying adjacent westerly; embracing throughout a width of forty-nine and five-tenths (49.5) feet on the right or northerly side of the said original Centre Line, and on the left or southerly side thereof a width of one hundred a ...[+++]nd forty-nine and five-tenths (149.5) feet, measured at right angles thereto;

The foregoing provisions are not intended to limit or interfere with the existing rights of the Government of the United States on the one side and the Government of the Dominion of Canada on the other, to undertake and carry on governmental works in boundary waters for the deepening of channels, the construction of breakwaters, the improvement of harbors, and other governmental works for the benefit of commerce and navigation, provided that such works are wholly on its own side of the line and do not materially affect the level or flow of the boundary waters on the other, nor are such provisions intended to interfere with the ordinary u ...[+++]se of such waters for domestic and sanitary purposes.

The cut-off must be horizontal straight line on the side opposite to the direction of traffic for which the headlamps is intended; on the other side it must extend neither beyond the broken line H-V, H1-H4 formed by a straight line HV-H1 standing at an angle of 45° to the horizontal and a straight line H1-H4 lying 25 cm above the straight line hh, nor beyond the straight line HV-H3, inclined at an angle of 15° above the horizontal (see Appendix 1).

The cut-off must be a straight horizontal line on the side opposite to the rule of the road for which the headlamp is intended. On the other side the cut-off must not go beyond either broken line HV-H1 and H4 formed by a straight line formed by HV-H1 lying at an angle of 45° with the horizontal and a straight line H1-H4 offset by 1 % in relation to straight line h-h, or straight line HV-H3 inclined by 15° to the horizontal (see Appendix 1).