Traduction de «matière à l'épreuve du feu » (Français → Anglais) :

With regard to access for candidates in competitions to their written tests and the evaluation sheets of those tests by the selection board, Article 6 of Annex III to the Staff Regulations constitutes a special provision which derogates from the general rules of Regulation No 1049/2001, since it governs access to specific types of documents.

Bonfire test: the purpose of the test is to provide evidence that the container with its fire protection system does not burst when tested under specified fire conditions.

It is necessary to provide for transitional arrangements enabling Member States to authorise the placing on the market and putting into service of such machinery manufactured in accordance with national provisions in force upon adoption of this Directive, including those implementing the Convention of 1 July 1969 on the Reciprocal Recognition of Proofmarks on Small Arms.

1. The text of the second subparagraph of Annex II is replaced by "special masonry units of category I or II with incorporated thermal insulating materials falling into classes A1 (1), A2 (1), B (1), C (1) to be used in walls and partitions subject to reaction to fire regulations, but only where this material is susceptible to be exposed to fire in its end use application", and a footnote 1 is added with the text "Products/materials for which a cleary identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material)".

(1) Materials for which the reaction to fire performance is susceptible to change during production (in general, those subject to chemical modification, e.g. fire retardants, or where changes of composition may lead to changes in reaction to fire performance).

- special masonry units of category I or II with incorporated thermal insulating materials classified under one of the Euroclasses A, B or C for which the reaction to fire performance either is susceptible to change during the production process (in general, those made with combustible raw materials) or is altered by means of incorporation of certain agents, like fire retardants, to be used in walls and partitions subject to reaction to fire regulations, but only where this material is susceptible to be exposed to fire in its end situation, and