Translation of "Air Force Airfield Engineering Training " (English → French) :

For forced cool-down, good engineering judgement shall be used to set up systems to send cooling air across the engine, to send cool oil through the engine lubrication system, to remove heat from the coolant through the engine cooling system, and to remove heat from an exhaust after-treatment system.

1. By way of derogation from Annex II Part A of this Regulation, training organisations may continue to apply training plans based on edition of 10 December 2004 of the Eurocontrol’s ‘Guidelines for air traffic controllers Common Core Content Initial Training’ for a period of one year after the entry into force of this Regulation.

The air force determined the training requirements, the number of students, the type of training, the courses that were required, and those were integrated into the contract.

It also includes any storage reservoirs for the operating medium and the return lines, but not the vehicle's engine (except for the purposes of item 4.1.3) or its drive to the energy source; 1.3.4.1. Energy source means that part of the energy supply which provides the energy in the required form e.g. hydraulic pump, air compressor; 1.3.4.2. Energy reservoir means that part of the energy supply in which the energy provided by the energy source is stored; 1.3.4.3. Storage reservoir means that part of the energy supply in which the operating medium is stored at or near to the atmospheric pressure. 1.4. Steering parameters 1.4.1. Steering control effort ...[+++]means the force applied to the steering control in order to steer the vehicle; 1.4.2. Steering time means the period of time from the beginning of the movement of the steering control to the moment at which the steered wheels have reached a specific steering angle; 1.4.3. Steering angle means the angle between the projection of a longitudinal axis of the vehicle and the line of intersection of the wheelplane (being the central plane of the tyre, normal to the spin axis of the wheel) and the road surface; 1.4.4. Steering forces mean all the forces operating in the steering transmission; 1.4.5 Mean steering ratio means the ratio of the angular displacement of the steering control to the mean of the swept steering angle of the steered wheels for a full lock-to-lock turn; 1.4.6. Turning circle means the circle within which are located the projections onto the ground plane of all the points of the vehicle, excluding the external mirrors and the front direction indicators, when the vehicle is driven in a circle; 1.4.7. Nominal radius of steering control means in the case of a steering wheel the shortest dimension from its centre of rotation to the outer edge of the rim. In the case of any other form of control, it means the distance between its centre of rotation and the point at which the steering effort is applied. ...

The Chairman: You know, Mr. Thompson, if there were a crisis in Iran or in the Persian Gulf or somewhere else in the world, the air force's engines would already be running.

In this regard, I would point out to you that Canadian Air Forces do not train at the base.