Translation of "Bottom plate parting line " (English → French) :

Notes that energy reporting obligations as part of a framework are essential to evaluate the progress and implementation of existing energy efficiency legislation; regrets, however, the excessive energy reporting obligations imposed, also by gold-plating by Member States, on businesses, energy producers, consumers and public authorities, which limit the potential for growth and innovation; stresses that reporting duties should wherever possible be simplified in order to reduce administrative burdens and costs; criticises the fact that data obtained in reporting are often not comparable across the EU due to different breakdowns, method ...[+++]ologies and standards; calls on the Commission to reduce, including through digital solutions, the administrative burden related to reporting obligations and to establish more guidelines on data comparability for better data evaluation; calls for aligning energy demand projections in line with cost-effective saving potential in key sectors, and believes that cutting red tape will speed up the implementation of energy efficiency measures; notes that applying the ‘energy efficiency first’ principle requires reviewing energy planning and reporting and improving policy coherence in order to ensure their mutual reinforcement, recognising that saving energy is Europe’s first and most secure source of energy; notes that energy efficiency can be the best energy ‘source’ investment, improving affordability of energy, driving down the need for additional and costly supply-side infrastructure and helping tackle climate change.

(2) When a double bottom is required by this section to be fitted in a ship, the inner bottom shall be continued out to the ship’s sides in such a manner as to protect the bottom to the turn of the bilge; the inner bottom shall be deemed to be adequate for this purpose if the line of intersection of the outer edge of the margin plate with the bilge plating is not lower at any point than a horizontal plane passing through the point ...[+++] of intersection with the frame line amidships of a transverse diagonal line inclined at 25 degrees to the base line and cutting it at a point one half of the ship’s moulded breadth from the middle line.

(i) outline profile and plans showing the margin lines (corrected as necessary); all watertight transverse and longitudinal bulkheads, decks, inner skins, shaft and other tunnels, trunks and ventilators; recesses and steps in watertight bulkheads; double bottoms, the principal openings in the watertight bulkheads and decks and openings therein closed only by portable plates, the appropriation ...[+++]of spaces below the bulkhead deck; the positions of equivalent plane bulkheads; the lengths of the main transverse compartments and the weathertight arrangements at the forward end; tunnels, recesses and steps shall be shown in plan and elevation and typical sections of the double bottom shall be given, and

A good solid bottom line in the supply managed sector has allowed us to develop world class genetics, to develop bio-security on farms, as well as through the whole system — " gate to plate," as we call it.