Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Annular combuster
Annular combustion chamber
Annular combustor
Annulus
Can annular combustion chamber
Can-annular combustion chamber
Can-type burner
Can-type combustor
Cannular combustion chamber
Cannular combustor
Combustion chamber outer liner
Combustion chamber outer shell
Individual combustion chamber
Multiple-can-type burner
Single basket type combustor
Tubo-annular combustion chamber

Translation of "Can annular combustion chamber " (English → French) :

TERMINOLOGY
see also In-Context Translations below
can annular combustion chamber [ cannular combustion chamber | tubo-annular combustion chamber | can-annular combustion chamber ]

chambre de combustion mixte [ chambre de combustion tubo-annulaire | chambre de combustion tubannulaire | chambre de combustion tubulo-annulaire ]


cannular combustion chamber | cannular combustor | can-annular combustion chamber

chambre de combustion tubo-annulaire | chambre de combustion tubannulaire | chambre de combustion mixte




annular combustion chamber

chambre de combustion annulaire


annular combustor [ annular combuster | annular combustion chamber | single basket type combustor ]

chambre de combustion annulaire


annular combustion chamber | annular combustor | annulus

chambre de combustion annulaire | chambre annulaire


combustion chamber outer liner | combustion chamber outer shell

partie extérieure de la chambre de combustion


can-type combustor | individual combustion chamber | can-type burner | multiple-can-type burner

chambres tubulaires | chambres individuelles | chambres séparées | chambres à barillets | chambres multiples
IN-CONTEXT TRANSLATIONS
Separate (multiple) combustion chambers (except cylinder): For firearms with separate or multiple combustion chambers, remove internal wall(s) from the combustion chamber(s) for a minimum of 2/3 of its length by machining.

Chambres de combustion distinctes (multiples), à l'exception du barillet: pour les armes à feu à chambres de combustion distinctes ou multiples, retirer par usinage les parois internes de chaque chambre de combustion, sur au minimum ⅔ de la longueur.


Barrel: For firearms with combustion chamber included in the barrel, a hole must be drilled across the combustion chamber through both walls and through which a hardened steel pin must be inserted and securely welded (diameter > 50 % chamber, min 4,5 mm).

Canon: pour les armes à feu dont la chambre de combustion est intégrée au canon, un trou doit être foré à travers les deux parois de la chambre de combustion, trou dans lequel doit être insérée et solidement soudée une tige d'acier (diamètre > 50 % de la chambre, min. 4,5 mm).


Barrel: Cut a longitudinal slot through the barrel including the combustion chamber where present (width: >.

Canon: tailler une fente longitudinale le long du canon, y compris la chambre de combustion, le cas échéant, (largeur: >.


For firearms without combustion chamber included in the barrel, cut a longitudinal slot (width >.

Pour les armes à feu sans chambre de combustion intégrée au canon, tailler une fente longitudinale (largeur >.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
‘exhaust gas recirculation’ or ‘EGR’ means a technical device that is part of the emission control system and reduces emissions by routing exhaust gases that have been expelled from the combustion chamber(s) back into the engine to be mixed with incoming air before or during combustion, except for the use of valve timing to increase the amount of residual exhaust gas in the combustion chamber(s) that is mixed with incoming air before or during combustion.

«recirculation des gaz d'échappement» ou «EGR», un dispositif technique qui fait partie du système de contrôle des émissions et qui réduit les émissions en renvoyant les gaz d'échappement expulsés de la ou des chambres de combustion dans le flux d'air d'admission avant ou pendant la combustion, à l'exception du recours au calage de distribution pour augmenter la quantité de gaz d'échappement résiduels dans la ou les chambres de combustion qui e ...[+++]


3. Each combustion chamber of a waste incineration plant shall be equipped with at least one auxiliary burner. This burner shall be switched on automatically when the temperature of the combustion gases after the last injection of combustion air falls below the temperatures set out in paragraph 2.

3. Chaque chambre de combustion d'une installation d'incinération des déchets est équipée d'au moins un brûleur d'appoint qui s'enclenche automatiquement lorsque la température des gaz de combustion tombe en dessous des températures prescrites au paragraphe 2 après la dernière injection d'air de combustion.


continuous measurements of the following process operation parameters: temperature near the inner wall or at another representative point of the combustion chamber as authorised by the competent authority, concentration of oxygen, pressure, temperature and water vapour content of the waste gas;

mesures en continu des paramètres d'exploitation suivants: température à proximité de la paroi interne ou à un autre point représentatif de la chambre de combustion autorisé par l'autorité compétente, concentration en oxygène, pression, température et teneur en vapeur d'eau des gaz résiduaires;


The competent authority may authorise the measurements at another representative point of the combustion chamber.

L'autorité compétente peut accepter que les mesures soient effectuées en un autre point représentatif de la chambre de combustion.


1. Incineration or co-incineration plants must be designed, equipped, built and operated in such a way that the gas resulting from the process is raised in a controlled and homogeneous fashion, even under the most unfavourable conditions, to a temperature of 850°C, as measured near the inner wall or at another representative point of the combustion chamber as authorised by the competent authority, for two seconds.

1. Toute usine d'incinération ou de coïncinération doit être conçue, équipée, construite et exploitée de manière à ce que les émanations gazeuses produites par l'incinération soient portées, d'une manière contrôlée et homogène, et même dans les conditions les plus défavorables, à une température de 850 °C à mesurer, pendant deux secondes, près de la paroi intérieure ou en tout autre point représentatif de la chambre de combustion autorisé par l'autorité compétente.


Incineration plants shall be designed, equipped, built and operated in such a way that the gas resulting from the process is raised, after the last injection of combustion air, in a controlled and homogeneous fashion and even under the most unfavourable conditions, to a temperature of 850ºC, as measured near the inner wall or at another representative point of the combustion chamber as authorised by the competent authority, for two seconds.

Les installations d'incinération sont conçues, équipées, construites et exploitées de manière à ce que, même dans les conditions les plus défavorables que l'on puisse prévoir, les gaz résultant du procédé soient portés, après la dernière injection d'air de combustion, d'une façon contrôlée et homogène à une température de 850ºC pendant deux secondes, mesurée à proximité de la paroi interne ou en un autre point représentatif de la chambre de combustion autor ...[+++]




datacenter (1): www.wordscope.ca (v4.0.br)

'Can annular combustion chamber' ->

Date index: 2020-12-21
w