Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Canadian Standard Test Methods for Leather

Traduction de «Canadian Standard Test Methods for Leather » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
Canadian Standard Test Methods for Leather

Méthodes standards canadiennes d'essai des cuirs


Methods of Sampling and Testing Waxes and Polishes - Standard Test Method for pH of Aqueous Solutions with the Glass Electrode

Méthodes d'échantillonnage et d'essai des cires et encaustiques - Méthode d'essai normalisée - Détermination du pH des solutions aqueuses au moyen d'une électrode en verre


Standard test method for the dynamic wind uplift resistance of membrane-roofing systems [ CAN/CSA-A123.21-14 ]

Méthode d'essai normalisée de la résistance dynamique à l'arrachement sous l'action du vent des systèmes de couverture à membrane [ CAN/CSA-A123.21-F14 ]
TRADUCTIONS EN CONTEXTE
(a) when tested using the snow traction test described in ASTM F 1805 - 06, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces, with medium pack snow and a test load equal to 74% of the test inflation rated load described in that test method, attains a traction index equal to or greater than 110 compared t ...[+++]

a) atteint un indice de traction égal ou supérieur à 110 par rapport à un pneu d’essai qui est conforme aux exigences de la norme E 1136 - 10 de l’ASTM, intitulée Standard Specification for P195/75R14 Radial Standard Reference Test Tire, lors de l’essai de traction sur neige qui figure dans la norme F 1805 - 06 de l’ASTM, intitulée Standard Test Method for Single Wheel Driving Traction in a ...[+++]


(a) a liquid, other than a liquid referred to in paragraph (c) or (d), having a viscosity of less than 5.8 mm /s (45 Saybolt Universal Seconds) at 37.8°C (100°F) is the Standard Test Method for Flash Point by Tag Closed Tester ASTM D56-82, dated August 27, 1982, or the appropriate test in the Standard Test Methods for Flash Point by Setaflash Closed Tester, ASTM D3828-8 ...[+++]

a) dans le cas d’un liquide dont la viscosité à 37,8 °C (100 °F) est inférieure à 5,8 mm /s (45 secondes universelles Saybolt) et qui n’est pas visé aux alinéas c) ou d), la méthode décrite dans la norme D56-82 de l’ASTM intitulée Standard Test Method for Flash Point by Tag Closed Tester, en date du 27 août 1982, ou la méthode décrite dans la norme D3828-81 de l’ASTM intitulée Standard Test Methods for Flash Point by Setaflash Closed Tester, en date du 28 août 1981;


(d) a paint, enamel, lacquer, varnish or similar liquid that has a flash point between 0°C (32°F) and 110°C (230°F) and a viscosity of less than 15 000 mm /s at 25°C (77°F) determined in accordance with the Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity), ASTM D445-83, dated October 28, 1983, is the appropriate test in the Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus, ASTM D3278-82, dated October 29, 198 ...[+++]

d) dans le cas de peinture, d’émail, de laque, de vernis ou d’un liquide similaire dont le point d’éclair se situe entre 0° C (32 °F) et 110 °C (230 °F) et dont la viscosité à 25 °C (77 °F) est inférieure à 15 000 mm /s, déterminée selon la méthode D445-83 de l’ASTM intitulée Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity), en date du 28 octobre 1983, la méthode décrite dans la norme D3278-82 de l’ASTM intitulée Standard Test Methods for Flash Point of Liquids b ...[+++]


2. To determine whether a drinking vessel bearing a distinctive exterior decorative pattern within 20 mm of the rim releases lead or cadmium, the following method, which is based on a standard of the American Society for Testing and Materials (ASTM C927-80), reapproved 2004, Standard Test Method for Lead and Cadmium Extracted from ...[+++]

2. Pour établir si un récipient à boire orné, à l’extérieur, d’un motif décoratif caractéristique situé à 20 mm ou moins du bord libère du plomb ou du cadmium, utiliser la méthode ci-après, basée sur la norme ASTM C927-80 de l’American Society for Testing and Materials, réapprouvée en 2004 et intitulée Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels:


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
(5) The vapour pressure of gasoline at 37.8°C (100°F) referred to in Schedule 1 must be measured in accordance with the American Society for Testing and Materials method D 5191-01, Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) and converted to “dry vapor pressure equivalent” as described in that method.

(5) La tension de vapeur de l’essence à 37,8 °C (100 °F) mentionnée à l’annexe 1 doit être mesurée conformément à la méthode D 5191-01 de l’American Society for Testing and Materials, intitulée Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method), et convertie en tension de vapeur sèche (dry vapor pressure equivalent) conformément à cette méthode.


Alternatively, measurement using remote sensing equipment and confirmed by standard test methods.

Des mesures peuvent aussi être faites au moyen des dispositifs de télédétection et confirmées par des méthodes d'essai standard.


Therefore alternative and non standard test methods which are however clearly approved by the appropriate Competent Authority need to be available.

C'est pourquoi d'autres méthodes de contrôle non conventionnelles, néanmoins approuvées par l'autorité compétente, doivent être disponibles.


Until the validity of standard test methods has been assessed for nanomaterials, a special justification has to be given for the use of these tests for the assessment of nanomaterials.

Tant que la validité des méthodes d'essai standard n'a pas été évaluée, une justification spéciale doit être apportée pour recourir à ces essais pour l'évaluation des nanomatériaux.


The Commission shall define the minimum standards and methods for testing the items listed in Annex II, and shall adopt any amendments necessary to adapt those methods and standards to technical progress.

La Commission définit les normes et les méthodes minimales concernant le contrôle des points énumérés à l'annexe II et adopte les modifications nécessaires pour l'adaptation au progrès technique de ces normes et méthodes.


74. Stresses that in research on meat-and-bone meal an analytical test method to monitor observance of processing standards (ELISA test) and a test procedure to detect meat-andbone meal in concentrates (Ispra test) have now been developed; considers that to check the validity of these methods collaborative tests should be carried out as quickly as possible in the EU;

74. souligne que, dans le domaine de la recherche sur les farines animales, un test analytique permettant de vérifier le respect des normes de transformation (test ELISA) et une procédure de test destinée à déceler la présence de farines de viande et d'os dans les aliments concentrés pour animaux (test Ispra) ont été mis au point dans l'intervalle et que pour vérifier la validité de ces méthodes, il faut procéder dans les plus bref ...[+++]




D'autres ont cherché : can csa-a123 21-14     Canadian Standard Test Methods for Leather     


datacenter (1): www.wordscope.ca (v4.0.br)

'Canadian Standard Test Methods for Leather' ->

Date index: 2021-10-18
w