Traduction de «Diesel-electric locomotive power cable » (Anglais → Français) :

507. Locomotives of a design capable of normal operation in either direction, such as Diesel electric or electric units, or any type of locomotive regularly assigned to such road service as to necessitate the running of tender first shall be equipped at the front and rear with a pilot or combination pilot and footboards, except that in the case of Diesel “A” and “B” units application is required only on the front end of “A” units.

Specifically, the Commission is requesting: Ireland and Portugal to transpose the Directive on lifts and safety components for lifts (Directive 2014/33/EU) which lays down the requirements that need to be met to place lifts and lift safety components on the EU market while ensuring a high level of safety for lift users and maintenance staff; Portugal to transpose the Directive on pressure equipment (Directive 2014/68/EU), which covers a broad range of industrial equipment, such as compressors and heat exchangers, but also to consumer products such as fire extinguishers and pressure cookers; and Cyprus to transpose the Directive on electromagnetic compatibility (Directive 2014/30/EU) and the Low Voltage Directive (Directive 2014/35/EU), th ...[+++]e first of which ensures that electrical and electronic equipment does not generate, nor is affected by, electromagnetic disturbance while the latter lays down the essential safety requirements for electrical equipment designed for use within certain voltage limits such as for example in household appliances, cables and power supply units.

‘external power supply’ means a component contained in a separate physical enclosure external to the computer casing and designed to convert line voltage AC input from the mains to lower DC voltage(s) for the purpose of powering the computer. An external power supply must connect to the computer via a removable or hard-wired male/female electrical connection, cable, cord or other wiring.

External Power Supply: A component contained in a separate physical enclosure external to the computer casing and designed to convert line voltage ac input from the mains to lower dc voltage(s) for the purpose of powering the computer. An external power supply must connect to the computer via a removable or hard-wired male/female electrical connection, cable, cord or other wiring.

The supply chain is still largely characterised by central generation of electricity in large power plants, followed by costly transport of the electricity to final consumers via cables. This transport generates further losses, mainly in distribution.

These products range from diesel electric locomotives to specialized spare parts, to core drilling and drill bit supplies.