Traduction de «Engineering order » (Anglais → Français) :

In order to mitigate the effects of climate change and improve the energy efficiency of fishing vessels, it should be possible to grant support to the modernisation and replacement of main and ancillary engines, provided that operators active in small–scale coastal fishing are given priority in the selection process in order to improve their access to financing, and provided that larger vessels contribute to the reduction of engine power.

Points (b) and (c) of the first subparagraph shall apply subject to the condition that where an engine is adapted for installation in a watercraft, the person undertaking the adaptation shall ensure that full account is taken of the data and other information available from the engine manufacturer in order to ensure that, when installed in accordance with the installation instructions provided by the person adapting the engine, that engine will continue to meet the exhaust emission requirements of either Directive 97/68/EC or of Regul ...[+++]ation (EC) No 595/2009, as declared by the engine manufacturer.

Question No. 899 Mr. Hoang Mai: With regard to the proposed new bridge on the St. Lawrence River: (a) why did the 2012 budget not include long-term planning for the proposed bridge; (b) have the cost estimates been further refined since initial estimates of between three and five billion dollars were made, and how are these estimated costs broken down, in as much detail as possible; (c) what further factors need to be taken into account to refine the estimates; (d) at what time in the financial analysis process will the Treasury Board of Canada or the Department of Finance be involved and to what extent; (e) has Transport Canada chosen the funding model and, if so, which one, and why; (f) will there be any public consultation concernin ...[+++]g the funding model; (g) have any economic models been created to understand the financial impacts of the various options for the project; (h) is public-private partnership (P3) still an option (i) who is involved in making the decision about P3, (ii) have there been concrete steps made in order to finalize a decision, (iii) will there be any public consultation regarding P3; (i) has Transport Canada decided on the type of structure (bridge or tunnel); (j) what are the initial outcomes of the government’s collaboration with the province of Québec to integrate transit onto the new bridge; (k) has Transport Canada been involved in the study of integrating a Light Rail Transit (LRT) onto the bridge, (i) at what stage in the planning process will the government define the parameters of public transportation on the bridge, (ii) how is the government coordinating the planning process with the government of Québec, the Agence métropolitaine de transport and other interested parties, (iii) when are the results of this study expected and will they be made public, (iv) is the LRT the preferred option according to the current status of the study, (v) will the government help fund a project of this calibre if LRT is chosen as the appropr ...

As my colleague mentioned earlier, it takes a long time for companies to get approvals, do the engineering, order the equipment, prepare the site, do foundation work, do mechanical construction, get the equipment delivered, get it installed, and get it commissioned, at which point the ACCA starts to kick in.

The engine shall be warmed up at maximum power in order to stabilise the engine parameters according to the recommendation of the manufacturer and good engineering practice. When the engine is stabilised, the engine map shall be performed as follows:

Whereas the scope of Directive 70/220/EEC was expanded by Directive 83/351/EEC in order to cover certain categories of vehicle equipped with compression ignition (´diesel') engines, without, however, laying down specific emission requirements for those engines; whereas only soot emissions are covered by Directive 72/306/EEC (10); whereas, however, with a view to improved protection of public health, it is necessary to restrict the overall particulate pollutant emissions from engines of this type; whereas it is appropriate to lay do ...[+++]wn limit values for particulate pollutant emissions which correspond to the state of the art with regard to diesel engines in the Community and to amplify the test procedure set out in Directive 70/220/EEC by adding the ; ; ; ; ; ; provisions relating to the sampling and analysis of particulate emissions taken over from the relevant United States requirements;