Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Electric cell horizontal scanning
Electric eye horizontal scanning
Elevator assembly
Elevator unit
Horizontal plane
Horizontal surface
Horizontal surface array
Horizontal surface visibility
Horizontal tail
Horizontal tail surface
Inner horizontal surface
Outer horizontal surface
Photo cell horizontal scanning
Photoelectric horizontal scanning
Photoelectric horizontal sensing
Trimmable horizontal surface actuator

Translation of "Horizontal surface " (English → French) :

TERMINOLOGY
see also In-Context Translations below
outer horizontal surface

surface horizontale extérieure


inner horizontal surface

surface horizontal intérieure


horizontal surface visibility

visibilité horizontale au sol


horizontal surface array

réseau horizontal d'électrodes






trimmable horizontal surface actuator

actionneur de plan horizontal réglable


elevator assembly (1) | elevator unit (2) | horizontal tail surface (3) | horizontal tail (4)

empennage de profondeur


surface planing machine, horizontal axle

machine à surfacer, à axe horizontal


electric eye horizontal scanning | photo cell horizontal scanning | photoelectric horizontal scanning | electric cell horizontal scanning | photoelectric horizontal sensing

barrage photoélectrique horizontal
IN-CONTEXT TRANSLATIONS
3.1. The vehicle shall be first placed on a horizontal surface.

3.1. Le véhicule doit être tout d’abord placé sur une surface horizontale.


The measurement of the length, height and front fitting radius shall be conducted where the loading surface or the reference surface referred to in point 1.2.1 second subparagraph of Annex 7 to UNECE Regulation No 55 is horizontal.

La mesure de la longueur, de la hauteur et du rayon d’encombrement avant est effectuée lorsque la surface de chargement ou la surface de référence visée au point 1.2.1, deuxième alinéa, de l’annexe 7 du règlement no 55 de la CEE-ONU est horizontale.


Navigation systems shall be designed, built, maintained and operated using appropriate and validated procedures in such a way as to achieve the required horizontal and vertical navigation performance, in particular in terms of accuracy and functional capability, for a given environment (surface, TMA, en-route), with known traffic characteristics and exploited under an agreed and validated operational concept.

Les systèmes de navigation doivent être conçus, construits, entretenus et exploités conformément à des procédures appropriées et validées, de manière à répondre aux performances de navigation verticales et horizontales requises, notamment en termes de précision et de capacité fonctionnelle pour un environnement donné (sol, région de contrôle terminale, en route), ayant des caractéristiques de trafic connues et exploité selon un concept d'exploitation agréé et validé.


The main line is anchored either horizontally on or near the bottom, vertically or can be allowed to drift on the surface.

La ligne principale est ancrée soit horizontalement sur le fond ou à proximité de celui-ci, soit verticalement; elle peut également être laissée à la dérive à la surface.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
(c) each transitional surface is a surface consisting of an inclined plane rising at a ratio of one (1) foot measured vertically to seven (7) feet measured horizontally at right angles to the centre line and centre line produced of each strip extending upward and outward from the lateral limits of each strip and its approach surfaces to an intersection, with the horizontal surface or another transitional surface of an adjoining strip

c) chaque surface de transition est une surface consistant en un plan incliné à raison de un (1) pied sur le plan vertical, pour sept (7) pieds, sur le plan horizontal, perpendiculairement à l’axe et au prolongement de l’axe de chaque bande s’étendant vers le haut et vers l’extérieur à partir des limites latérales de chaque bande et de ses surfaces d’approche jusqu’à une intersection avec la surface horizontale ou une autre surface de transition d’une bande adjacente,


Being a surface consisting of an inclined plane having a ratio of one (1) foot measured vertically to seven (7) feet measured horizontally at right angles to the centre line and centre line produced of each strip, and extending upward and outward from the lateral limits of each strip and its approach surfaces to an intersection with the horizontal surface or another transitional surface of an adjoining strip, all as shown on Department of Transport Plan No. MT-0749 (A, B, C, D) dated November 19, 1971.

Soit une surface constituée d’un plan incliné qui s’élève à raison de un (1) pied dans le sens vertical et de sept (7) pieds dans le sens horizontal, suivant une direction perpendiculaire à l’axe et au prolongement de l’axe de chaque bande et qui s’étend vers le haut et vers l’extérieur à partir des limites latérales de chaque bande et de ses surfaces d’approche, jusqu’à son intersection avec la surface horizontale ou une autre surface de transition d’une bande adjacente, lesdites surfaces de transition sont indiquées sur le plan n MT-0749 (A, B, C, D) du ...[+++]


Being a surface consisting of an inclined plane rising at a ratio of one (1) foot measured vertically to seven (7) feet measured horizontally at right angles to the centre line and centre line produced of each strip, and extending upward and outward from the lateral limits of each strip and its approach surfaces to an intersection with the horizontal surface or another transitional surface of an adjoining strip, all as shown on Department of Transport Plan No. M-3800 dated May 4, 1972.

Soit une surface constituée d’un plan incliné s’élevant à raison de un (1) pied dans le sens vertical et de sept (7) pieds dans le sens horizontal, suivant une direction perpendiculaire à l’axe et au prolongement de l’axe de chaque bande, s’étendant vers le haut et vers l’extérieur de chaque bande et de ses surfaces d’approche jusqu’à une intersection avec la surface horizontale ou une autre surface de transition d’une bande adjacente; ces surfaces de transition sont indiquées sur le plan n M-3800, en date du 4 mai 1972, du ministère des Transports.


Being a surface consisting of an inclined plane rising at a ratio of one (1) foot measured vertically to seven (7) feet measured horizontally at right angles to the centre line and centre line produced of each strip, and extending upward from the lateral limits of each strip and its approach surfaces to an intersection with the horizontal surface or another transitional surface of an adjoining strip, all as shown on Department of Transport Plan No. M-3710, dated September 20, 1971.

La surface de transition est un plan incliné à raison de un (1) pied dans le sens vertical contre sept (7) pieds dans le sens horizontal suivant une direction perpendiculaire à l’axe et à la projection du centre de chaque bande, s’élevant à partir des limites latérales de chaque bande et de ses surfaces d’approche jusqu’à intersection avec la surface horizontale ou une surface de transition d’une bande adjacente; ces surfaces de transition sont indiquées sur le plan n M-3710, daté du 20 septembre 1971, du ministère des Transports.


Being a surface consisting of an inclined plane rising at a ratio of one (1) foot measured vertically to seven (7) feet measured horizontally at right angles to the centre line and centre line produced of each strip, and extending upward from the lateral limits of each strip and its approach surfaces to an intersection with the horizontal surface or another transitional surface of an adjoining strip, all as shown on Department of Transport Plan No. V. 226, dated January 15, 1969.

La surface de transition est un plan incliné perpendiculaire à l’axe de chaque bande et à ses prolongements, qui s’élève à un angle correspondant au rapport de un (1) pied mesuré verticalement pour chaque longueur de sept (7) pieds mesurée horizontalement et qui s’étend vers le haut à partir des limites latérales de chaque bande et de ses surfaces d’approche jusqu’à une intersection avec la surface horizontale ou une autre des surfaces de transition d’une bande adjacente. Toutes ces surfaces sont indiquées sur le plan n V. 226 daté du 15 janvier 1969 et c ...[+++]


It may be deployed either vertically or horizontally to the sea surface; it may be set either at or near the bottom (bottom-set longline) or drifting in midwater or near the surface (surface longline).

La palangre peut être mouillée verticalement ou horizontalement par rapport à la surface de la mer; elle peut être placée au fond ou près du fond (palangre de fond) ou dériver entre deux eaux ou près de la surface (palangre dérivante).


w