Translation of "Lateral load resisting system " (English → French) :

The brake system shall resist a thermal load equivalent to the suggested reference case in point 4.2.4.3.3.

in Section 3 ‘Products and systems for protecting load-bearing elements or parts of works’, the classification table that relates to ‘ceilings with no independent fire resistance’ is replaced by the following table:

Other key features include a fully marinized structure and engines for continuous corrosion resistant operations in a maritime environment; extensive use of composites to increase resistance to corrosion fatigue; state-of-the-art crash-worthiness features in the areas of structural design, load attenuation, passenger safety, payload retention, fire suppression, and emergency escape; triple redundant digital fly-by-wire flight controls and hydraulic systems; Rolls- ...[+++]Royce AE 1107C engines, which share the same engine core as found on the CC-130J; modern avionics with glass cockpit displays; a number of radar options to include weather, maritime search, or terrain-following and terrain avoidance; an ice protection system, which includes both anti-ice and de-ice capabilities certified into known moderate icing—and most of our testing of that system was actually performed in Shearwater; and an open passenger and cargo cabin with roller rails, winch, hoist, and a rear loading ramp to provide the SAR techs with the clearance required to safely perform all necessary ground and airborne tasks. The V-22 program is in full production.

In particular, the Commission should be empowered to establish the specific procedures, tests and requirements for the type-approval of motor vehicles, components and separate technical units; to define more precisely the characteristics a tyre must fulfil to be defined as ‘special use tyre’, ‘off-road professional tyre’, ‘reinforced tyre’, ‘extra load tyre’, ‘snow tyre’, ‘T-type temporary-use spare tyre’ or ‘traction tyre’; to set out specific safety requirements for vehicles intended for the transport of dangerous goods by road within or between Member States; to exempt certain vehicles or classes of vehicles of categories M, M, N a ...[+++]nd N from the obligation to install advanced emergency braking systems and/or lane departure warning systems; to amend the limit values on rolling resistance and rolling noise for tyres as a result of changes in test procedures without lowering the level of protection of the environment; to establish rules on the procedure for the determination of noise levels of tyres; to shorten the sell-off period for tyres not complying with the requirements set out in this Regulation and its implementing measures; and to amend Annex IV to include the Regulations of the United Nations Economic Commission for Europe (UNECE Regulations) which are mandatory under Council Decision 97/836/EC of 27 November 1997 with a view to accession by the European Community to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions .

This value can be increased if the Infrastructure Manager can demonstrate that the actuation and locking system of the switch is able to resist the lateral impact forces of a wheelset.

The load on the chassis dynamometer FE is, in view of its construction, composed of the total friction loss Ff which is the sum of the chassis dynamometer rotating frictional resistance, tyre rolling resistance and frictional resistance to the rotating parts in the driving system of the motorcycle, and the braking force of the power absorbing unit (pau) Fpau, as shown in the following equation: