Translation of "Precision distance measuring equipment " (English → French) :

‘navaid equipment’ means a physical navaid equipment placed on the Earth surface, like Very High Frequency Omnidirectional Radio Range (VOR), Distance Measuring Equipment (DME), localizer, Tactical Air Navigation Beacon (TACAN) etc., which help in guiding aircraft traffic safely through existing air routes,

is the irradiance of the tanning equipment, measured at the minimum exposure distance, and

(d) the exposure of ionizing radiation or kerma emitted by the X-ray source assembly when the irradiation control circuit has not been activated, or by any other component at any time, does not exceed 645 nanocoulombs per kilogram (2.5 milliroentgens) or 22 micrograys, in any one-hour period, when averaged over a detection area of 10 cm and measured at a distance of 5 cm from any accessible surface of the equipment.

(g) the leakage radiation from the X-ray tube housing, when measured at a distance of 1 m from the target and averaged over an area of 100 cm having no linear dimension greater than 20 cm, does not exceed 25.8 microcoulombs per kilogram (100 milliroentgens) or 0.87 milligrays in any one-hour period under any combination of loading factors within the rated limits of use of the equipment.

In particular, the Commission should be empowered to establish the specific procedures, tests and requirements for the type-approval of motor vehicles, components and separate technical units; to define more precisely the characteristics a tyre must fulfil to be defined as ‘special use tyre’, ‘off-road professional tyre’, ‘reinforced tyre’, ‘extra load tyre’, ‘snow tyre’, ‘T-type temporary-use spare tyre’ or ‘traction tyre’; to set out specific safety requirements for vehicles intended for the transport of dangerous goods by road within or between Member States; to exempt certain vehicles or classes of vehicles of categories M, M, N and N from the obligation to install advanced emergency braking systems and/or lane departure warning syst ...[+++]ems; to amend the limit values on rolling resistance and rolling noise for tyres as a result of changes in test procedures without lowering the level of protection of the environment; to establish rules on the procedure for the determination of noise levels of tyres; to shorten the sell-off period for tyres not complying with the requirements set out in this Regulation and its implementing measures; and to amend Annex IV to include the Regulations of the United Nations Economic Commission for Europe (UNECE Regulations) which are mandatory under Council Decision 97/836/EC of 27 November 1997 with a view to accession by the European Community to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions .

The terminal is also equipped with a precise contactless measuring device which determines the current insertion depth with 46 micrometer precision.