Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Angle drilling
Angle of deviation
Angle of deviation between 2 e.m.f.'s
Angle of deviation between two e.m.f.'s
Angle of squint
Average deviation
Constant deviation angle
Deflection angle
Deviated drilling
Deviation angle
Directional drilling
Downhole deviation drilling
High-angle drilling
High-angle hole
Highly deviated drilling
Highly deviated hole
M.D.
M.d.
Mean absolute deviation
Mean deviation

Translation of "angle deviation " (English → French) :

TERMINOLOGY
see also In-Context Translations below
angle of deviation between 2 e.m.f.'s | angle of deviation between two e.m.f.'s

écart angulaire entre deux f.é.m. | écart angulaire entre deux forces électromotrices


highly deviated drilling [ high-angle drilling | highly deviated hole | high-angle hole ]

forage à grande déviation [ forage à forte déviation | forage très dévié ]


angle drilling | deviated drilling | directional drilling | downhole deviation drilling

forage dévié | forage directionnel | forage dirigé | forage en déviation


angle of deviation | deflection angle

angle de déflexion | angle de déviation


angle of deviation [ angle of squint ]

angle de déviation [ angle du strabisme ]








Features the presence of a usually opposable triphalangeal thumb with or without additional duplication of one or more skeletal components of the thumb. The thumb appearance can differ widely in shape (wedge to rectangular) or it can be deviated in t

polydactylie d'un pouce triphalan


mean deviation | m.d. | M.D. | average deviation | mean absolute deviation

écart moyen | e.m.
IN-CONTEXT TRANSLATIONS
where α is the angle measured from the horizontal position of the front face (fitted the right way up) of the equipment for which the instrument is calibrated, while β and γ represent respectively the maximum permissible upward and downward deviations from the angle of calibration α.

dans laquelle α représente l’angle mesuré à partir de la position horizontale de la face avant (orientée vers le haut) de l’appareil pour lequel l’instrument est étalonné, β et γ représentant respectivement les écarts limites admissibles vers le haut et vers le bas par rapport à l’angle α.


(22) If the retroreflective sheeting referred to in S5.7.1.2 of TSD 108 is applied to a non-vertical surface, the entrance angle used to demonstrate that the sheeting conforms to the photometric requirements prescribed by that section shall be the sum of the entrance angle specified in column 1 of Figure 29 of TSD 108 and the angle, measured at the horizontal centreline of the sheeting, by which the sheeting deviates from the vertical.

(22) Lorsque le matériau rétroréfléchissant visé à la disposition S5.7.1.2 du DNT 108 est apposé sur une surface non verticale, l’angle d’éclairage utilisé pour démontrer la conformité du matériau avec les exigences photométriques prévues à cette disposition doit être égal à la somme de l’angle d’éclairage spécifié dans la première colonne de la figure 29 du DNT 108 et de l’angle, mesuré sur l’axe horizontal du matériau, entre la verticale et le matériau.


(10) If reflective material referred to in S5.1.1.4 of TSD 108 is applied to a non-vertical surface, the entrance angle used to demonstrate that the material conforms to the performance standards prescribed by that section shall be the sum of the entrance angle specified in Table 1 or Table 1A of SAE Standard J594f, Reflex Reflectors (January 1977), and the angle, measured on the horizontal centreline of the material, by which the material deviates from the vertical.

(10) Lorsqu’un matériau réfléchissant visé à la disposition S5.1.1.4 du DNT 108 est installé sur une surface non verticale, l’angle d’éclairage utilisé pour démontrer la conformité du matériau avec les normes d’efficacité prévues à cette disposition doit être est égal à la somme de l’angle d’éclairage spécifié aux tableaux 1 ou 1A de la norme J594f de la SAE, intitulée Reflex Reflectors (janvier 1977), et de l’angle, mesuré sur l’axe horizontal du matériau, entre la verticale et le matériau.


where α is the angle measured from the horizontal position of the front face (fitted the right way up) of the equipment for which the instrument is calibrated, while β and γ represent respectively the maximum permissible upward and downward deviations from the angle of calibration α.

dans laquelle α représente l’angle mesuré à partir de la position horizontale de la face avant (orientée vers le haut) de l’appareil pour lequel l’instrument est étalonné, β et γ représentant respectivement les écarts limites admissibles vers le haut et vers le bas par rapport à l’angle α.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
azimuth angle of the South façade (deviation from the South direction of the ‘South’ oriented façade)

Angle azimutal de la façade sud (déviation de la façade orientée au sud par rapport à la direction du sud).


From the European angle, this is about European money that can only be made available under strict conditions for use in regions and cities and that must be demanded back if deadlines are exceeded or the planned spending plan deviated from.

Du point de vue de l’Europe, il s’agit d’argent européen, mis à disposition sous de strictes conditions pour être utilisé dans les régions ou les villes, et qui doit être réclamé si les délais sont dépassés ou si l’on s’écarte de la destination prévue.


Optical deviation: the angle between the true and apparent direction of a point viewed through the safety-glass pane, the magnitude of the angle being a function of the angle of incidence of the line of sight, the thickness and inclination of the glass pane and the radius of curvature at the point of incidence.

Déviation optique: angle que fait la direction apparente avec la direction vraie d'un point vu au travers de la vitre de sécurité. La valeur de cet angle est fonction de l'angle d'incidence du rayon visuel, de l'épaisseur et de l'inclinaison de la vitre, et du rayon de courbure au point d'incidence.


Optical distortion in a direction MM: the algebraic difference in angular deviation AEá measured between two points M and M on the surface of the safety-glass pane, the distance between the two points being such that their projections in a plane at right angles to the direction of vision are separated by a given distance AEx (see Figure 6).

Distorsion optique dans une direction MM': différence algébrique de déviation angulaire AEá mesurée entre deux points M et M', de la surface de la vitre, espacés de façon que leurs projections dans un plan perpendiculaire à la direction d'observation soient distantes d'une valeur fixe AEx (voir la figure 6).


where a is the angle measured from the horizontal position of the front face (fitted the right way up) of the equipment for which the instrument is calibrated, while v and g represent respectively the maximum permissible upward and downward deviations from the angle of calibration a.

dans laquelle a représente l'angle mesuré à partir de la position horizontale de la face avant (orientée vers le haut) de l'appareil pour lequel l'instrument est réglé, v et g représentant respectivement les écarts limites admissibles vers le haut et vers le bas par rapport à l'angle a.




datacenter (1): www.wordscope.ca (v4.0.br)

'angle deviation' ->

Date index: 2022-12-19
w