Traduction de «circuit identifier » (Anglais → Français) :

the segregation of duties in the financial circuits; urges the Agency therefore to promptly address these deficiencies identified by the IAS and to inform the discharge authority of the measures taken;

The Scientific Committee on Emerging and Newly Identified Health Risks, in its opinion on ‘Risk Assessment of Products of Nanotechnology’ of 19 January 2009, stated that exposure to nanomaterials that are firmly embedded in large structures, for example in electronic circuits, may occur in the waste phase and during recycling.

(16) The Scientific Committee on Emerging and Newly Identified Health Risks, in its opinion on ‘Risk Assessment of Products of Nanotechnology’ of 19 January 2009, stated that exposure to nanomaterials that are firmly embedded in large structures, for example in electronic circuits, may occur in the waste phase and during recycling.

11. Deplores the fact that the Centre has not comprehensively fulfilled its obligation to send to the authority responsible for discharge a report drawn up by its Director summarising the number of internal audits conducted by the internal auditor as provided for in Article 72(5) of the framework Financial Regulation; acknowledges, nevertheless, that the Centre gave some information on the six recommendations still open, which are considered to be ‘very important’ by the Commission's Internal Audit Service; notes that these affect the quality of management (as regards scientific advice, health communication and strengthening the current procedure for urgent risk/threat assessment), follow-up action in respect of certain internal control s ...[+++]tandards (such as the setting-up of financial circuits) and the implementation of other internal control standards (such as identifying weaknesses and structuring the annual Activity Report);

redefinition of the objective of the regulation: to contain, prevent and thereby reduce emissions of the fluorinated greenhouse gases; introduction of the definition of "stationary application or equipment"; for containment purposes, inclusion of the circuits of refrigeration, air conditioning and heat pump equipment into the list of stationary applications; replacement of the word "inspections" by the word "checks" (article 3); for the producer reporting purposes, the addition of two categories of applications to be identified : solvents and fire ...[+++] protection; operators of the applications containing 3 kg or more shall maintain records of the relevant information specifically identifying the separate stationary equipment; labels should indicate that the product or equipment contains FGG covered by the Kyoto protocol and their quantity, while instruction manuals should provide more information on the FGG contained in those products and equipment, including on their global warming potential; placing on the market prohibition: stricter national measures adopted by 31 December 2005 may be maintained until 31 December 2012, subject to notification to the Commission, together with justification, and compatibility with the Treaty; the procedures set out in the Treaty would apply to the introduction of any new stricter national measures; a new item to be subject to review: the need for further action by the European Community and its Member States in the light of existing and new international commitments regarding the reduction of greenhouse gas emissions; introduction of a date – 31 December 2008 – for the Commission to present, if appropriate, legislative proposals relating to air conditioning and refrigeration systems reviewing this regulation; promotion of alternatives: Member States may promote the placing on the market of equipment which use alternatives to gases with a high global warming potential and which are efficient, innovative and further reduce the ...

Three major stages (assembly, testing and diffusion) have been identified in the manufacture of integrated circuits and it has been determined that the diffusion stage is the most sophisticated and difficult from the technical point of view and requires the largest research input.