Traduction de «divide-by-zero error » (Anglais → Français) :

zero output | zero error

zero error | zero shift

independent identically distributed mean zero error term

zero error

pitch circle dividing error

zero point error

196. The load discrimination of a machine equipped with a self-indicating or semi-self-indicating means of registration of either the analogue or the digital type shall be such that for the purpose of determining compliance with the acceptance limits of error or in-service limits of error for the machine and at any load from zero to maximum capacity, the addition to or removal from the load-receiving element of a weight corresponding to 1.4 times the value of the minimum increment of registration shall cause a change in registration equal to or greater than the value of the minimum increment of registration.

Commencing at a point (hereinafter called the point of commencement) located on the Southern side of a Public Road, at a distance of two hundred forty-one feet and one tenth (241.1′) measured on a bearing South eighty-six degrees forty-six minutes West (S.86°46′W) from the intersection of said Southern side of a Public Road with the dividing line between lots Nos. 18-A and 19-A; thence, on a bearing South eighty-two degrees fifteen minutes West (S.82°15′W.), a distance of four hundred sixty-one feet and seven tenths (461.7′) to a point; thence, on a bearing South zero degree fifty-eight minutes East (S.0°58′E.), a distance of three hundred eighty-seven feet and four tenths (387.4′) to a point; thence, on a bearing North eighty-eight degr ...[+++]ees thirty-seven minutes East (N.88°37′E.), a distance of four hundred nineteen feet and two tenths (419.2′) to a point; thence, on a bearing North forty-two degrees forty-five minutes East (N.42°45′E), a distance of fifty feet and six tenths (50.6′) to a point; thence, on a bearing North zero degree twenty-two minutes West (N.0°22′W), a distance of four hundred two feet and three tenths (402.3′) to the point of commencement.

14. On the basis of the results of the audits of operations for the purpose of the audit opinion and control report referred to in Article 127(5)(a) of Regulation (EU) No 1303/2013, the audit authority shall calculate a total error rate, which shall be the sum of the projected random errors and, if applicable, systemic errors and uncorrected anomalous errors, divided by the population.

14. On the basis of the results of the audits of operations for the purpose of the audit opinion and control report referred to in Article 127(5)(a) of Regulation (EU) No 1303/2013, the audit authority shall calculate a total error rate, which shall be the sum of the projected random errors and, if applicable, systemic errors and uncorrected anomalous errors, divided by the population.