Traduction de «edges the hinge-plate » (Anglais → Français) :

the plane touching the upper edge of the plate and forming an angle measured upwards of 15° with the horizontal,

(6) Riveting of the shell plating to the keel, stem and sternpost shall be by botton head rivets, staggered with not less than 39 rivets to the metre and the distance from the edge of the plate to the centres of the rivets in the nearest rows shall be not less than 12.5 mm nor more than 19 mm.

The brush is hinged with pin hinges at the rear edge of the baseboard and rests vertically on the carriage with a pressure of 150 g (1/3 pound).

(i) to the hinge pillar, door latch post or the door edge that meets the door latch post next to the driver’s seating position,

(2) When a double bottom is required by this section to be fitted in a ship, the inner bottom shall be continued out to the ship’s sides in such a manner as to protect the bottom to the turn of the bilge; the inner bottom shall be deemed to be adequate for this purpose if the line of intersection of the outer edge of the margin plate with the bilge plating is not lower at any point than a horizontal plane passing through the point of intersection with the frame line amidships of a transverse diagonal line inclined at 25 degrees to the base line and cutting it at a point one half of the ship’s moulded breadth from the middle line.

That effort will likely hinge on how willing the developed world is to enhance and apply cutting edge food and agricultural technology, including in part, GMOs.