Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
% elongation at fracture
Breaking elongation
Ductile yield
Elongation
Elongation after fracture
Elongation at break
Elongation at failure
Elongation at fracture
Elongation at rupture
Elongation of rupture
Elongation percentage
Greenstick fracture
Greenstick-type fracture
Hickory-stick fracture
Hypertrophic elongation of cervix uteri
Interperiosteal fracture
Peptide chain elongation
Percent elongation
Percentage of elongation
Ultimate elongation
Willow fracture

Traduction de «elongation at fracture » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
% elongation at fracture | elongation at failure

allongement à la rupture en %






ultimate elongation [ elongation at break | breaking elongation | elongation of rupture ]

allongement à la rupture [ allongement de rupture ]


percent elongation [ elongation percentage | percentage of elongation ]

allongement pour cent après rupture [ allongement pour cent | allongement total pour cent à la rupture | pourcentage d'allongement | coefficient d'allongement ]


elongation at break | elongation at rupture | elongation of rupture | ductile yield

allongement à la rupture | allongement de rupture | allongement


greenstick fracture [ greenstick-type fracture | willow fracture | hickory-stick fracture | interperiosteal fracture ]

fracture en bois vert


peptide chain elongation | elongation

élongation de la chaîne peptidique | élongation de la chaîne protéique | élongation


elongation at break | elongation at rupture

allongement à la rupture


Hypertrophic elongation of cervix uteri

Allongement hypertrophique du col de l'utérus
TRADUCTIONS EN CONTEXTE
elongation after fracture (Lo = 5,65√So )

allongement après rupture (Lo = 5,65√So )


The latter materials shall at minimum working temperature have an appropriate elongation after fracture and bending rupture energy.

Ces derniers matériaux doivent avoir, à la température minimale de service, un allongement après rupture et une énergie de flexion par choc appropriés.


the elongation after fracture shall be: if test pieces are taken parallel to the direction of rolling:

l'allongement après rupture est: si l'éprouvette est prélevée parallèlement à la direction de laminage


elongation after fracture (Lo = 80 mm)

allongement après rupture (Lo = 80 mm)


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
The latter materials shall at minimum working temperature have an appropriate elongation after fracture and bending rupture energy.

Ces derniers matériaux doivent avoir, à la température minimale de service, un allongement après rupture et une énergie de flexion par choc appropriés.


3.2.2. The materials used for the outer jacket shall ensure the integrity of the insulation system, and their elongation at fracture in a tensile test shall be at least 12 per cent at liquid nitrogen temperature.

3.2.2. Les matériaux utilisés pour l’enveloppe extérieure doivent assurer l’intégrité du système d’isolation et leur allongement à la fracture dans une épreuve de traction doit être d’au moins 12 % à la température de l’azote liquide.


- In the case of unalloyed aluminium, the elongation after fracture must not be less than 12 %.

- Pour l'aluminium non alliée, l'allongement après rupture ne peut être inférieur à 12 %.


- With regard to the alloys B referred to in 2.1.2 (b), the elongation after fracture must not be less than 12 % where the tensile test is carried out on a single test-piece taken from the cylinder wall.

- Pour les alliages B visés au point 2.1.2 sous b), l'allongement après rupture doit être au moins égal à 12 % lorsque l'essai de traction est exécuté sur une seule éprouvette prélevée dans la paroi de la bouteille.


- With regard to the alloys C referred to in 2.1.2 (b) and the alloys referred to in 2.1.2 (c), elongation after fracture must not be less than 12 %.

- Pour les alliages C visés au point 2.1.2 sous b) et les alliages visées au point 2.1.2 sous c), l'allongement après rupture ne doit pas être inférieur à 12 %.




datacenter (1): www.wordscope.ca (v4.0.br)

'elongation at fracture' ->

Date index: 2022-12-24
w