Translation of "end the passing zone " (English → French) :

§ 40 EEG-Act 2012 limits the amount of the surcharge that can be passed on by electricity suppliers to EIUs: upon request, the Bundesamt für Wirtschaft und Ausfuhrkontrolle (‘BAFA’), a public authority, will issue an administrative act that prohibits the electricity supplier from passing on the totality of the EEG-surcharge to an end-user when the end-user is a manufacturing undertaking with high electricity consumption (9).

Where these are agreed, they are granted on condition that the impact of the economic advantage is passed on to the end-user who, as appropriate, may be the consumer in the case of products meant for direct consumption, the end processor or packager in the case of products meant for the processing or packaging industries or farmers in the case of products used for animal feed or as agricultural inputs.

the procedural rules on the disposal of goods; the procedural rules on the provision of information establishing that the conditions for relief from import duty for returned goods are fulfilled and on the provision of evidence that the conditions for relief from import duty for products of sea-fishing and other products taken from the sea are fulfilled; the procedural rules on the examination of the economic conditions in the context of special procedures; the procedural rules on the discharge of a special procedure; the procedural rules on the transfer of rights and obligations and the movement of goods in the context of special procedures; the procedural rules on the use of equivalent goods in the context of special procedures; the ...[+++]procedural rules for the application of the provisions of international transit instruments in the customs territory of the Union; the procedural rules on the placing of goods under the Union transit procedure and on the end of that procedure, on the operation of the simplifications of that procedure and on the customs supervision of goods passing through the territory of a country or territory outside the customs territory of the Union under the external Union transit procedure; the procedural rules on the placing of goods under the customs warehousing or free zone procedure; to lay down the time-limit within which risk analysis is to be carried out on the basis of the pre-departure declaration; to specify the procedural rules on the exit of goods;

The other end shall pass over a deflector roller with its horizontal axis parallel to the plane of the section of strap supporting the load, the section passing over the roller being horizontal.

(2) The provisions on "buffer zones" should be improved to reduce the risk of short distance spreading of Erwinia amylovora (Burr.) Winsl. et al. To that end the "buffer zones" should be clearly delimited and a strict control regime should be applied which includes the removal of plants showing symptoms of Erwinia amylovora (Burr.) Winsl. et al.

1.3.4.The pendulum block shall be pulled back so that the height of its centre of gravity above that at the point of impact is given by one of the following two formulae, to be chosen according to the reference mass of the tractors subjected to the tests:H = 25 + 0,20 mt for tractors with a reference mass of less than 2 000 kilograms,H = 125 + 0,15 mt for tractors with a reference mass of more than 2 000 kilograms.The pendulum block must then be released so as to strike the protection structure.1.4.Crushing at the rearThe beam shall b ...[+++]e positioned over the rear uppermost structural member(s) and the resultant of the crushing forces shall be located in the tractor's median plane.A force, Fv = 20 mt shall be applied.Where the rear part of the protection structure roof will not sustain the full crushing force, the force shall be applied until the roof is deflected to coincide with the plane joining the upper part of the protection structure with that part of the rear of the tractor capable of supporting the vehicle's mass when overturned.The force shall then be removed, and the tractor or loading force repositioned so that the beam is over that point of the protection structure which would then support the tractor when completely overturned.The force Fv shall then be applied.It shall be applied for a minimum of five seconds following the cessation of any visually detectable deflection.1.5.Crushing at the frontThe beam shall be positioned over the front uppermost structural member(s) and the resultant of the crushing forces shall be located in the tractor's median plane.A force, Fv = 20 mt shall be applied.Where the front part of the protection structure roof will not sustain the full crushing force, the force shall be applied until the roof is deflected to coincide with the plane joining the upper part of the protection structure with that part of the front of the tractor capable of supporting the vehicle's mass when overturned.The force shall then be removed, and the t ...