Traduction de «fuel measuring unit » (Anglais → Français) :

weights and measures [ unit of measurement | Unit of measurement(STW) | metric system(UNBIS) ]

source/monitor unit | source-measure unit | stimulus/measurement unit | SMU [Abbr.]

tank unit [ fuel level sender | fuel sender | sender unit | fuel level transmitter | fuel sending unit | sending unit | fuel tank sender ]

fuel-tank pickup unit [ fuel sender unit | fuel sending unit | fuel tank sending unit ]

length measuring unit | log measuring device | log measuring gate | measuring device

fuel control unit | FCU | fuel flow regulator | fuel control assembly | fuel flow control unit

unit of measurement | unit of measure | measure unit | standard

container-type fuel measuring instrument

EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32008R0692 - EN - Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) - COMMISSION REGULATION - (EC) No 692/2008 // of 18 July 2008 // implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to ve ...[+++]hicle repair and maintenance information // ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL // Appendix 1 // Verification of conformity of production — First statistical method // Appendix 2 // Verification of conformity of production — Second statistical method // Appendix 3 // MODEL // INFORMATION DOCUMENT No . // Appendix to information document // INFORMATION ON TEST CONDITIONS // Appendix 4 // MODEL OF EC TYPE-APPROVAL CERTIFICATE // (Maximum format: A4 (210 × 297 mm)) // Addendum to EC type-approval certificate No . // concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007 // Appendix 5 // Vehicle OBD information // Appendix 6 // EC Type –Approval Certification Numbering System // Appendix 7 // IN-SERVICE CONFORMITY // IN-SERVICE CONFORMITY CHECK // STATISTICAL PROCEDURE FOR IN-SERVICE CONFORMITY TESTING // RESPONSIBILITIES FOR IN-SERVICE CONFORMITY // VERIFYING AVERAGE EXHAUST EMISSIONS AT AMBIENT CONDITIONS // (TYPE 1 TEST) // EMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES // MEASURING CARBON MONOXIDE EMISSION AT IDLING SPEEDS // (TYPE 2 TEST) // MEASUREMENT OF SMOKE OPACITY // VERIFYING EMISSI ...

Several Member States took market-based measures to encourage energy efficiency (e.g. Belgium and Italy) or to support the use of alternative fuels (e.g. France, Austria, Sweden and the United Kingdom); however, others weakened the price signal of higher energy prices by lowering fuel taxes.

is the carbon content of, as the case may be, the composite sample, or the sample, of the fuel for the i sampling period expressed for solid fuels, liquid fuels and gaseous fuels, respectively, in the same unit of measure as the one set out in CC , as provided by the supplier of the fuel to the responsible person and, if not so provided, as determined by the responsible person, and measured

is the quantity of CO emissions, expressed in tonnes, from the combustion of fuel in the unit, including those emissions referred to in subsection 3(4), during the calendar year — other than the quantity of those emissions as measured by the CEMS and set out in the description of E — that is determined using a direct measure of the flow of, and the concentration of CO in, the emissions from that combustion of fuel but that is not ultimately captured, transported and stored as described in subsection 3(5).