Translation of "general guidelines for cooperation " (English → French) :

European standards for systems or constituents, together with the relevant procedures, drawn up by the European standardisation bodies in cooperation with Eurocae, on a mandate from the Commission in accordance with Article 6(4) of Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and pursuant to the general guidelines on coope ...[+++]ration between the Commission and the standardisation bodies signed on 13 November 1984; or

(17) Whereas, therefore, this Directive defines only the essential health and safety requirements of general application, supplemented by a number of more specific requirements for certain categories of machinery; whereas, in order to help manufacturers to prove conformity to these essential requirements and in order to allow inspection for conformity to the essential requirements, it is desirable to have standards harmonised at European level for the prevention of risks arising out of the design and construction of machinery; whereas these standards harmonised at European level are drawn up by private-law bodies and must retain their non-binding status; whereas for this purpose the European Committee for Standardisation (CEN) and the Eu ...[+++]ropean Committee for Electrotechnical Standardisation (Cenelec) are the bodies recognised as competent to adopt harmonised standards in accordance with the general guidelines for cooperation between the Commission and these two bodies signed on 13 November 1984; whereas, within the meaning of this Directive, a harmonised standard is a technical specification (European standard or harmonisation document) adopted by either or both of these bodies, on the basis of a remit from the Commission in accordance with the provisions of Directive 83/189/EEC (4) and on the basis of general guidelines referred to above;

Whereas this Directive defines only general essential health and safety requirements; whereas, in order to help manufacturers prove conformity with these essential requirements, it is desirable to have standards harmonized at European level concerning the prevention of risks arising from the design and installation of lifts, and also in order to enable conformity with the essential requirements to be verified; whereas such standards are drawn up at European level by private-law bodies and must retain their non-binding status; whereas, for this purpose, the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) are recognized as the competent bodies for adopting harmonized st ...[+++]andards in accordance with the general guidelines for cooperation between the Commission and CEN and Cenelec signed on 13 November 1984; whereas a harmonized standard within the meaning of this Directive is a technical specification adopted by CEN and/or Cenelec on the basis of a mandate from the Commission in accordance with Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulations (1) and pursuant to the abovementioned general guidelines;

Whereas, in order to facilitate proof of conformity with these essential requirements and to permit monitoring of that conformity, it is desirable to have Europe-wide harmonized standards in respect of the prevention of risks in connection with the design, manufacture and packaging of active implantable medical devices; whereas such standards harmonized at European level are drawn up by private-law bodies and must retain their status as non-mandatory texts; whereas, to that end, the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) are recognized as being the competent bodies to adopt harmonized standards in accordance with the < ...[+++]b class=yellow3>general guidelines for cooperation between the Commission and these two bodies, signed on 13 November 1984; whereas, for the purposes of this Directive, a harmonized standard is a technical specification (European standard or harmonization document) adopted by either or both of these bodies, as instructed by the Commission pursuant to the provisions of Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulations (4), as last amended by Directive 88/182/EEC (5), and under the abovementioned general guidelines;

Whereas, therefore, this Directive defines only the essential health and safety requirements of general application, supplemented by a number of more specific requirements for certain categories of machinery; whereas, in order to help manufacturers to prove conformity to these essential requirements and in order to allow inspection for conformity to the essential requirements, it is desirable to have standards harmonized at European level for the prevention of risks arising out of the design and construction of machinery; whereas these standards harmonized at European level are drawn up by private-law bodies and must retain their non-binding status; whereas for this purpose the European Committee for Standardization (CEN) and the Europea ...[+++]n Committee for Electrotechnical Standardization (Cenelec) are the bodies recognized as competent to adopt harmonized standards in accordance with the general guidelines for cooperation between the Commission and these two bodies signed on 13 November 1984; whereas, within the meaning of this Directive, a harmonized standard is a technical specification (European standard or harmonization document) adopted by either or both of these bodies, on the basis of a remit from the Commission in accordance with the provisions of Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulations (4), as last amended by Directive 88/182/EEC (5), and on the basis of general guidelines referred to above;

be assumed to comply with the protection requirements; whereas these standards harmonized at European level are drawn up by private bodies and must remain non-binding texts; whereas for that purpose the European Committee for Electrotechnical Standardization (CENELEC) is recognized as the competent body in the field of this Directive for the adoption of harmonized standards in accordance with the general guidelines for cooperation between the Commission and the European Committee for Standardization (CEN) and CENELEC signed on 13 November 1984; whereas, for the purposes of this Directive, a harmonized standard is a technical specifica ...[+++]tion (European standard or harmonization document) adopted by CENELEC upon a remit from the Commission in accordance with the provisions of Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulations (1), as last amended by Directive 88/182/EEC (2), and pursuant to the abovementioned general guidelines;