Traduction de «heat seal equipment operator » (Anglais → Français) :

2. Undertakings operating refrigeration, air conditioning or heat pump equipment, or fire protection systems, including their circuits, which contain controlled substances shall ensure that the stationary equipment or systems:

Question No. 419 Ms. Kirsty Duncan: With respect to the risk of corrosion and spills and other safety concerns arising from the transport of bitumen in pipelines, and to government action to address these risks: (a) how does diluted bitumen compare with West Texas Intermediate (WTI) in terms of (i) abrasive material content, (ii) acid concentration, (iii) sulphur content, (iv) viscosity; (b) to what extent is diluted bitumen more likely than WTI to cause corrosion or erosion in the pipelines through which they respectively flow; (c) what is the composition of diluted bitumen in Canada; (d) what are all of the volatile chemicals, persi ...[+++]stent organic pollutants or carcinogenic substances present in diluted bitumen in Canada; (e) in the process of diluting bitumen in Canada, what are the (i) natural gas condensates used, (ii) other petroleum products used; (f) what is the process by which diluted bitumen corrodes pipelines, with specific reference to (i) abrasion, (ii) friction, (iii) high pressure, (iv) settling of sediment, (v) velocity, (vi) sulphur-reducing bacteria, (vii) other significant factors; (g) for all proposed or existing National Energy Board (NEB)-regulated pipelines, what is (i) the amount of hard sediment passing through the pipeline annually, (ii) the average pressure, (iii) the average temperature; (h) what, if any, (i) research, (ii) action, (iii) investment has the government undertaken to determine whether diluted bitumen can flow safely through pipelines; (i) what, if any, (i) research, (ii) action, (iii) investment has the government undertaken to determine whether or not conventional crude should be distinguished from diluted bitumen when setting minimum standards for pipelines; (j) what, if any, (i) research, (ii) action, (iii) investment has the government undertaken to design safety and spill responses and spill liability management capabilities that are appropriate specifically to diluted bitumen; (k) how does a diluted bitumen sp ...

3. Where the fluorinated greenhouse gas charge for refrigeration, air conditioning or heat pump equipment is not indicated in the manufacturer’s technical specifications or on the label of that system, the operator shall ensure that it is determined by certified personnel.

This Regulation establishes, pursuant to Regulation (EC) No 842/2006, the standard leakage checking requirements for working and temporarily out of operation stationary refrigeration, air conditioning and heat pump equipment containing 3 kg or more of fluorinated greenhouse gases.

1. Operators of the following stationary applications: refrigeration, air conditioning and heat pump equipment, including their circuits, as well as fire protection systems, which contain fluorinated greenhouse gases listed in Annex I, shall, using all measures which are technically feasible and do not entail disproportionate cost:

redefinition of the objective of the regulation: to contain, prevent and thereby reduce emissions of the fluorinated greenhouse gases; introduction of the definition of "stationary application or equipment"; for containment purposes, inclusion of the circuits of refrigeration, air conditioning and heat pump equipment into the list of stationary applications; replacement of the word "inspections" by the word "checks" (article 3); for the producer reporting purposes, the addition of two categories of applications to be identified : ...[+++]solvents and fire protection; operators of the applications containing 3 kg or more shall maintain records of the relevant information specifically identifying the separate stationary equipment; labels should indicate that the product or equipment contains FGG covered by the Kyoto protocol and their quantity, while instruction manuals should provide more information on the FGG contained in those products and equipment, including on their global warming potential; placing on the market prohibition: stricter national measures adopted by 31 December 2005 may be maintained until 31 December 2012, subject to notification to the Commission, together with justification, and compatibility with the Treaty; the procedures set out in the Treaty would apply to the introduction of any new stricter national measures; a new item to be subject to review: the need for further action by the European Community and its Member States in the light of existing and new international commitments regarding the reduction of greenhouse gas emissions; introduction of a date – 31 December 2008 – for the Commission to present, if appropriate, legislative proposals relating to air conditioning and refrigeration systems reviewing this regulation; promotion of alternatives: Member States may promote the placing on the market of equipment which use alternatives to gases with a high global warming potential and which are efficient, innovative and further reduce the ...