Traduction de «idle-speed control » (Anglais → Français) :

idle-speed control [ idling-speed control | low-idle-speed control ]

idle-speed control [ idling-speed control ]

idle speed control motor | ISC | idle speed control | idle speed control servo | idle speed control valve

electronic idle-speed control

idle speed control | ISC | throttle opener

free speed | idle speed | idling speed | no load engine speed

speed without load | no-load speed | load-free speed | idling speed | idle speed | nominal speed

high idle | high idle speed

speed control [ maximum speed | minimum speed | speed limit | tachograph | Driving speed(STW) | speed limitation(UNBIS) ]

EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32008R0692 - EN - Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) - COMMISSION REGULATION - (EC) No 692/2008 // of 18 July 2008 // implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to ve ...[+++]hicle repair and maintenance information // ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL // Appendix 1 // Verification of conformity of production — First statistical method // Appendix 2 // Verification of conformity of production — Second statistical method // Appendix 3 // MODEL // INFORMATION DOCUMENT No . // Appendix to information document // INFORMATION ON TEST CONDITIONS // Appendix 4 // MODEL OF EC TYPE-APPROVAL CERTIFICATE // (Maximum format: A4 (210 × 297 mm)) // Addendum to EC type-approval certificate No . // concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007 // Appendix 5 // Vehicle OBD information // Appendix 6 // EC Type –Approval Certification Numbering System // Appendix 7 // IN-SERVICE CONFORMITY // IN-SERVICE CONFORMITY CHECK // STATISTICAL PROCEDURE FOR IN-SERVICE CONFORMITY TESTING // RESPONSIBILITIES FOR IN-SERVICE CONFORMITY // VERIFYING AVERAGE EXHAUST EMISSIONS AT AMBIENT CONDITIONS // (TYPE 1 TEST) // EMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES // MEASURING CARBON MONOXIDE EMISSION AT IDLING SPEEDS // (TYPE 2 TEST) // MEASUREMENT OF SMOKE OPACITY // VERIFYING EMISSI ...

When tested with the energy source at idling speed and of 2/3 of maximum engine speed, a control line of the towed vehicle simulator (point 3.6 of Annex III) connected to the hydraulic control line.

(a) tailpipe emissions, including test cycles, the use of portable emissions measurement systems for verifying the actual in-use emissions, verifying and limiting off cycle emissions in order to comply with the emission limits specified in Annex I, establishment of limits for particle number while retaining the existing ambitious environmental requirements, emissions at idling speed, smoke opacity and correct functioning and regeneration of pollution control devices;

(a) tailpipe emissions, including test cycles, off cycle emissions, particle number, emissions at idling speed, smoke opacity and correct functioning and regeneration of pollution control devices;