Translation of "pitch plane " (English → French) :

pitch plane [ pitch surface of worm ]

pitch-regulated wind turbine [ pitch regulated wind turbine | pitch-regulated WT | pitch-regulated windmill | pitch-controlled wind turbine | pitch-controlled WT | pitch controlled wind turbine | variable pitch wind turbine | variable pitch WT | variable pitch blade wind turbine ]

pitch maneuver | pitch manœuvre | pitch over maneuver | pitch-over maneuver | pitch over manoeuvre | pitch-over manoeuvre

carry out a sales pitch | make a sales pitch | deliver a sales pitch | delivering a sales pitch

planing machine tending | tending planing machine | operating planing machine | tend planing machine

apply a coat of hot pitch to seams | cover seams with hot pitch | coat seams with hot pitch | coat seams with hot resin

fixed pitch propeller | fixed-pitch | fixed-pitch propeller

The distance between the front surface of the seat back and the vertical plane through the rearmost part of the seat in front shall be a minimum of 680 mm, noting that the required seat pitch shall be measured from the centre of the seat 70 mm above where the cushion meets the back support.

Timber or lumber or wood, namely: lumber and timber planks and boards of amaranth, cocoboral, boxwood, cherry, chestnut, walnut, gumwood, mahogany, pitch pine, rosewood, sandalwood, sycamore, spanish cedar, oak, hickory, whitewood, African teak, black-heart ebony, lignum vitae, red cedar, redwood, satinwood and white ash, when not otherwise manufactured than roughsawn or split or creosoted, vulcanized or treated by any other preserving process; sawed or split boards, planks, deals and other lumber when not further manufactured than dressed on one side only or creosoted, vulcanized or treated by any preserving process; pine and spruce c ...[+++]lapboards; timber or lumber hewn or sawed, squared or sided or creosoted; laths, pickets and palings; staves not listed or jointed of wood of all kinds; firewood, handle, heading, stave, and shingle bolts, hop poles, fence posts, railroad ties; hubs for wheels, posts, last blocks, wagon, oar, gun, heading and all like blocks or sticks rough hewn, or sawed only; felloes of hickory wood, rough sawn to shape only, or rough sawn and bent to shape, not planed, smoothed or otherwise manufactured; hickory billets and hickory lumber, sawn to shape for spokes of wheels, but not further manufactured; hickory spokes, rough turned, not tenoned mitred, throated, faced, sized, cut to length, round tenoned or polished; shingles of wood; the wood of the persimmon and dogwood trees; and logs and round unmanufactured timber, ship timber or ship planking, not specially enumerated or provided for in the Customs Tariff.

"CRF pitch angle" is the angle between the bottom surface of the fixture ISO/F2 (B) as defined in Regulation No. 16 (Annex 17, Appendix 2, Figure 2) and the horizontal Z plane of the vehicle as defined in Regulation No. 14 (Annex 4, Appendix 2), with the fixture installed in the vehicle as defined in Regulation No. 16 (Annex 17, Appendix 2).

The CRF base shall have a pitch angle of 15° ± 10°, above the horizontal plane passing through the ISOFIX anchorages system.