Traduction de «plate door secured by bolts » (Anglais → Français) :

bolt maintaining small plate

sole-plate bolted to a concrete block

Notes that energy reporting obligations as part of a framework are essential to evaluate the progress and implementation of existing energy efficiency legislation; regrets, however, the excessive energy reporting obligations imposed, also by gold-plating by Member States, on businesses, energy producers, consumers and public authorities, which limit the potential for growth and innovation; stresses that reporting duties should wherever possible be simplified in order to reduce administrative burdens and costs; criticises the fact that data obtained in reporting are often not comparable across the EU due to different break ...[+++]downs, methodologies and standards; calls on the Commission to reduce, including through digital solutions, the administrative burden related to reporting obligations and to establish more guidelines on data comparability for better data evaluation; calls for aligning energy demand projections in line with cost-effective saving potential in key sectors, and believes that cutting red tape will speed up the implementation of energy efficiency measures; notes that applying the ‘energy efficiency first’ principle requires reviewing energy planning and reporting and improving policy coherence in order to ensure their mutual reinforcement, recognising that saving energy is Europe’s first and most secure source of energy; notes that energy efficiency can be the best energy ‘source’ investment, improving affordability of energy, driving down the need for additional and costly supply-side infrastructure and helping tackle climate change.

If the container is secured to the motor vehicle by a container frame, the container frame, the container straps, washers, or plates and bolts used shall meet the provisions of paragraphs 1 to 5 above.

Secure a 500 (+ 0/– 5) mm wide 750 mm high sample of the equipment to be tested to the vertical plate of the testing equipment, making sure that the sample lies well within the limits of the collector, and that no obstacle is able to deflect the water, either before or after its impact.

Secure a 305 × 100 mm sample vertically in the test assembly, check that there is no space between the sample and the upper curved plate and that the tray is properly in position.