Traduction de «rolling line » (Anglais → Français) :

where the examination concerns the practical part of train driving competences, the examiner shall be licensed as train driver and hold a complementary certificate authorising the use of infrastructure and the driving of rolling stock that is subject to the examination, or a similar type of line/rolling stock; when the examiner does not hold a valid certificate for the infrastructure/rolling stock of the examination, a driver holding the certificate for that infrastructure/rolling stock shall be present to the examination in accordan ...[+++]ce with Article 4(2)(e) of Directive 2007/59/EC;

Upgrading introduced for the operation of trains complying with the High-Speed Rolling Stock TSI should comply with the preceding values for line gradients, except when specific local conditions require higher values; this being so, the acceptable gradients values shall take into account the limiting characteristics of the rolling stock in traction and braking, as defined in High-Speed Rolling Stock TSI.

Upgrading introduced for the operation of trains complying with the High-Speed Rolling Stock TSI should comply with the preceding values for line gradients, except when specific local conditions require higher values; this being so, the acceptable gradients values shall take into account the limiting characteristics of the rolling stock in traction and braking, as defined in High-Speed Rolling Stock TSI.

Following the announcement by the Chairman of the Usinor Sacilor group in February 2001 that he intended to close down Cockerill Sambre’s hot-rolling line in Charleroi, talks were entered into between Usinor-Cockerill Sambre, the Duferco group and Sogepa primarily with a view to setting up a joint venture to produce slabs based on Cockerill Sambre’s existing mill in Charleroi together with the plant owned by Duferco Clabecq (continuous casting) (8).

This may include in particular railway lines and networks isolated from the rest of the Community, the loading gauge, the track gauge or space between the tracks and rolling stock strictly intended for local, regional or historical use, as well as rolling stock originating from or destined for third countries, as long as this stock does not cross the border between two Member States.

()Appendix 2 MODEL REFERENCE AXLE TEST REPORT FORM AS PRESCRIBED IN APPENDIX 1, ITEM 3.6 TEST REPORT N° 1.IDENTIFICATION 1.1.Axle Manufacturer (name and address) Make Type Model Technically permissible mass (Pe) (kg) 1.2.Brake Manufacturer (name and address) Make Type Model Technically permissible camshaft input torque Cmax Brake drum:Internal diameter Mass Material (attach dimensioned drawing as in Figure 1) Brake lining:Manufacturer Type Identification (must be visible when the lining is mounted on the brake shoe) Width Thickness Surface area Method of attachment Brake geometry (attach dimensioned drawing as in Figure 2) 1.3Wheel (S) S ...[+++]ingle/twin(1) Rin diameter (D) (attach dimensioned drawing as in Figure 1) 1.4Tyres Rolling radius (R) at reference mass (P2) 1.5Actuation Manufacturer Type (cylinder/diaphragm)(1) Model Lever length (l) 2.RECORD OF TEST RESULTS (Corrected to take account of rolling resistance) >TABLE>