Translation of "Gyroscope fixé au véhicule " (French → English) :

Insufficient load capacity or speed rating for actual use, tyre touches other fix vehicle parts impairing save driving

More in particular ,they concern the setting of specific NO2 emission limits within the wider NOx emission range, cancelling the ammonia limit for Heavy Duty combustion engines, modifying cold start emission limits inherited from previous "Euro" stages , a measure to adapt the Total Hydrocarbon Emissions (THC) in order to facilitate the introduction of natural gas vehicles, a measure aiming at adding methane as a greenhouse gas equivalent to the total CO2 emissions every car manufacturer has to comply with and the possibility to extend from 2 840 kg to 5 000 kg the range of vehicles which can fall under the emission rules for light comme ...[+++]rcial vehicles.

(1a) EU type approval requirements exist inter alia on CO2-emissions (Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emission performance standards for new passenger cars as part of the Community's integrated approach to reduce CO2-emissions from light-duty vehicles and Regulation (EU) No 510/2011 of the European Parliament and of the Council of 11 May 2011 setting emission performance standards for new light commercial vehicles as part of the Union's integrated approach to reduce CO2-emissions from light-duty vehicles(s) and on pollutant emissions (Regulation (EC) No 715/2007 of the Eu ...[+++]ropean Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information and Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information).

‘bumper’ means any front, lower, outer structures of a vehicle, including attachments thereto, which are intended to give protection to a vehicle when involved in a low speed frontal collision with another vehicle; it does not include, however, any frontal protection system.

This includes principally the Waste Framework Directive [111], which requires Member States to ensure that waste is treated without endangering human health or the environment, lays down permitting and inspection obligations and to adopt waste management plans, the Landfill Directive [112] which sets requirements for safe landfill and the reduction of waste going to landfill, in particular biodegradable waste, the Packaging Waste Directive [113], which sets recovery and recycling targets, the Incineration Directive [114] which sets emission limit values for incinerators, and the ELV [115] and EEE [116] Directives, which set recovery, recycling and reuse targets and take-back obligations for end-of-life ...[+++]vehicles and electronic and electrical equipment respectively.

This Directive lays down measures which aim, as a first priority, at the prevention of waste from vehicles and, in addition, at the reuse, recycling and other forms of recovery of end-of life vehicles and their components so as to reduce the disposal of waste, as well as at the improvement in the environmental performance of all of the economic operators involved in the life cycle of vehicles and especially the operators directly involved in the treatment of end-of life vehicles.