Traduction de «Machine à étirer à froid » (Français → Anglais) :

For the product types exported by the sampled Chinese (groups of) exporting producers for which no sales were made by the sampled Union producers, the Commission provisionally used prices actually paid or payable in the Union for the like product, duly adjusted if necessary to include a reasonable profit, of the closest resembling product types having the same diameter, steel grade and product type (e.g. cold or hot drawn).

The pendulum tube shall have a mass of 3 ± 0,03 kg, an outside diameter of 150 mm + 1 mm/- 4 mm and a wall thickness of 3 ± 0,15 mm. Total pendulum tube length shall be 275 ± 25 mm. The pendulum tube shall be made from cold finished seamless steel (metal surface plating is permissible for protection from corrosion), with an outer surface finish of better than 2,0 micrometers.

3.3.7. The pendulum tube shall have a mass of 3 ± 0,03 kg, an outside diameter of and a wall thickness of 3 ± 0,15 mm. Total pendulum tube length shall be 275 ± 25 mm. The pendulum tube shall be made from cold finished seamless steel (metal surface plating is permissible for protection from corrosion), with an outer surface finish of better than 2,0 micrometers.

If EN 50242: 1998 is used, the following modifications shall apply: the tests shall be carried out at 55 °C ± 2 °C with cold pre-wash without detergent; the machine used in the test shall be connected to cold water and must hold 12 place settings with a washing index of between 3,35 and 3,75; the machine's drying programme shall be used, but only the cleanliness of the dishes shall be assessed; a weak acidic rinsing agent in accordance with the standard (formula III) shall be used; the rinsing agent setting shall be between 2 and 3; the dosage of dishwashing detergent shall be as recommended by the manufacturer; three attempts shal ...[+++]l be carried out at a water hardness in accordance with the standard; an attempt consists of five washes where the result is read after the fifth wash without the dishes being cleaned between the washes; the result shall be better than or identical to the reference detergent after the fifth wash; recipe for the reference detergent (Detergent B IEC 436) and rinsing agent (formula III), see Appendix B in the standard EN 50242: 1998 (the tensides are to be stored in a cool place in watertight containers not exceeding 1 kg and are to be used within three months).

If EN 50242: 1998 is used, the following modifications shall apply: the tests shall be carried out at 55 °C ± 2 °C with cold pre-wash without detergent; the machine used in the test shall be connected to cold water and must hold 12 place settings with a washing index of between 3,35 and 3,75; the machine's drying programme shall be used, but only the cleanliness of the dishes shall be assessed; a weak acidic rinsing agent in accordance with the standard (formula III) shall be used; the rinsing agent setting shall be between 2 and 3; the dosage of dishwashing detergent shall be as recommended by the manufacturer; three attempts shal ...[+++]l be carried out at a water hardness in accordance with the standard; an attempt consists of five washes where the result is read after the fifth wash without the dishes being cleaned between the washes; the result shall be better than or identical to the reference detergent after the fifth wash; recipe for the reference detergent (Detergent B IEC 436) and rinsing agent (formula III), see Appendix B in the standard EN 50242: 1998 (the tensides are to be stored in a cool place in watertight containers not exceeding 1 kg and are to be used within three months).

In 1988 Elopak acquired Purepak, the packaging-machine division of Excello (USA), for which it acted as distributor for its fresh filling machines.