Traduction de «Procédé de séchage à haute température » (Français → Anglais) :

Assessment and verification: The applicant shall provide test reports using the following standards EN ISO 63 30, ISO 5077 as follows: 3 washes at temperatures as indicated on the product, with tumble drying after each washing cycle unless other drying procedures are indicated on the product,

Assessment and verification: The applicant shall provide test reports using the following standards EN ISO 63 30, ISO 5077 as follows: 3 washes at temperatures as indicated on the product, with tumble drying after each washing cycle unless other drying procedures are indicated on the product,

All processes directly or indirectly linked to the process units blast furnace, hot metal treatment units, blast furnace blowers, blast furnace hot stoves, basic oxygen furnace, secondary metallurgy units, vacuum ladles, casting units (including cutting), slag treatment unit, burden preparation, BF gas treatment unit, dedusting units, scrap pre-heating, coal drying for PCI, vessels preheating stands, casting ingots preheating stands, compressed air production, dust treatment unit (briquetting), sludge treatment unit (briquetting), steam injection in BF unit, steam generation plant, converter BOF gas cooling and miscellaneous are included

The actual fibres are manufactured at a very limited number of industrial sites and are in general directly transformed within the same manufacturing process into articles that are subsequently used in a broad range of industrial equipment for high-temperature insulation, which can potentially lead to significant worker exposure.

(24) Dust from steel shops is normally treated through two different processes: the so-called Waelz process, which involves burning the dust mixed with coke and sand at high temperatures and whose main disadvantage is the production of very low value slag and the emission of high quantities of combustion gases; and the chemical stabilisation/solidification process, which, by mixing the dusts with other elements, allows the resulting waste to be dumped in controlled sites since it can be classed as non-toxic and non-dangerous.

Where the 'ultra high temperature' milk treatment process is employed by direct contact of milk and steam, the steam must be obtained from potable water and must not leave deposits of foreign matter in the milk or affect it adversely.