Translation of "Procédé en basserie à chaud " (French → English) :

Subsequently, the hollow can be first processed by a hot-finishing process resulting in a hot-finished pipe and further processed by a cold-finishing process (cold pilger process) or by a cold drawing process, resulting in a cold-finished pipe.

Hon. David Kilgour: In New Zealand, 65% of the beef is killed through hot boning.

It specifies that when manufactured from ruminant bone material, gelatine must be produced using a unique process that ensures that all bone material is subjected to an alkaline treatment of saturated lime solution (pH > 12,5) for a period of at least 20 days with a heat treatment step of 138 °C minimum during at least four seconds, after having been finely crushed and degreased with hot water and treated with dilute hydrochloric acid (at minimum concentration of 4 % and pH

Immediate/Short-termLonger term | Reduction in demand (e.g. smaller engines)Advanced high-efficiency ICEsImproved hybrid electric designs with petrol, diesel, biodieselBio-diesel; bio-ethanolCo-processing of biomass with fossil fuelsSynthetic fuels from gas/coal-Fischer-TropschBiofuels from ligno-cellulosic feedstocksElectric vehicles (EVs) with advanced battery electricity storageHydrogen with fuel cellsAir transport: hydrogen/gas turbine | Low/medium temperature solar thermal applications for hot water, heating, cooling, industrial processesCombined Cycle Gas Turbine (CCGT)Nuclear fission (Gen ...[+++] III/III+)Wind energy (including offshore/deep offshore)System integration (grid issues)Solid biomassFuel cells (SOFC, MCFC)Geothermal energy (including deep geothermal – HDR/HFR)Carbon capture and storage (CCS)Cleaner use of coal (steam/gas turbine, combined cycle) with CCSAdvanced fossil fuel plants (super/ultra-supercritical steam; Integrated Gasification CC (IGCC), with CCSSolar photovoltaic (PV)Solar thermal power plantsOcean energy (wave, sea current)Nuclear fission – Generation IVNuclear fusion |

all ruminant bone material derived from animals born, reared or slaughtered in countries or regions classified as having a low incidence of BSE in accordance with Community legislation is subjected to a process which ensures that all bone material is finely crushed and degreased with hot water and treated with dilute hydrochloric acid (at minimum concentration of 4 % and pH 12,5) for a period of at least 20 days with a sterilisation step of 138 to 140 °C during four seconds or by any approved equivalent process;

- all ruminant bone material which is derived from animals born, reared and slaughtered in category 3 countries or regions is subjected to a process which ensures that all bone material is finely crushed and degreased with hot water and treated with dilute hydrochloric acid (at minimum concentration of 4 % and pH < 1,5) over a period of at least two days, followed by an alkaline treatment of saturated lime solution (pH > 12,5) for a period of at least 20 days with a sterilisation step of 138-140 °C during four seconds or by an equivalent process approved by the Commission after consultation of the appropriate Scientific Committee,