Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Bras de renvoi
Bras de rétroviseur
Bras de support
Bras de support de moniteur
Bras de support de palier
Bras de support du pendule
Bras de support pour électrode
Bras support
Bras support de rétroviseur
Levier intermédiaire de direction
Levier relais
Support de rétroviseur
Système d'assistance de support de bras dynamique

Traduction de «bras de support » (Français → Anglais) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
bras de support | bras support

cantilever support | support arm










bras de support de moniteur

bras de support de moniteurs


bras de renvoi [ levier intermédiaire de direction | levier relais | bras de support ]

idler arm [ steering idler arm | steering relay lever | idler arm assembly | steering idler arm assembly ]


bras support de rétroviseur | support de rétroviseur | bras de rétroviseur

mirror arm | mirror bracket


système d'assistance de support de bras dynamique

Assistive dynamic arm support system


TRADUCTIONS EN CONTEXTE
8. Dans le cas de tous les bossoirs faits d’acier coulé, ou d’acier soudé ou autre matériau obtenu par corroyage, chaque bossoir devra, ses bras étant au point le plus éloigné, pouvoir supporter une épreuve de charge statique d’au moins 2,2 fois la partie de la charge pratique supportée par chaque bras.

8. In the case of all davits made of cast steel or of wrought steel or other material fabricated by a welding process, each davit at full outreach shall be capable of withstanding a static load test of not less than 2.2 times that part of the working load supported by each arm.


Cependant, se croiser les bras coûterait nettement plus cher, tant pour l’Europe que le reste de la planète, coût qui serait en outre supporté par les franges les plus vulnérables de la société.

The cost of doing nothing would be much higher, however, for both Europe and the rest of the world, and it would be paid above all by the weakest sections of society.


Le bras du pendule a une masse de 285 ± 5 g. La masse de toute partie rotative de l'axe auquel le bras du support est attaché ne doit pas être supérieure à 100 g. La longueur entre l'axe horizontal central du cylindre du pendule et l'axe de rotation de l'ensemble du pendule est de 1250 ± 1 mm. L'axe longitudinal du cylindre d'impact est horizontal et perpendiculaire à la direction de l'impact.

The pendulum arm has a mass of 285 (± 5) g. The mass of any rotating part of the axle to which the support arm is attached should not be greater than 100 g. The length between the central horizontal axis of the impactor cylinder and the axis of rotation of the whole pendulum shall be 125 (± 1) mm. The impact cylinder is mounted with its longitudinal axis horizontal and perpendicular to the direction of impact.


Le bras du pendule a une masse de 285 ± 5 g. La masse de toute partie rotative de l'axe auquel le bras du support est attaché ne doit pas être supérieure à 100 g. La longueur entre l'axe horizontal central du cylindre du pendule et l'axe de rotation de l'ensemble du pendule est de 1 250 ± 1 mm. L'axe longitudinal du cylindre d'impact est horizontal et perpendiculaire à la direction de l'impact.

The pendulum arm has a mass of 285 ± 5 g. The mass of any rotating part of the axle to which the support arm is attached should not be greater than 100 g. The length between the central horizontal axis of the impactor cylinder and the axis of rotation of the whole pendulum shall be 1 250 ± 1 mm. The impact cylinder is mounted with its longitudinal axis horizontal and perpendicular to the direction of impact.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
3.3.5. Le pendule rigide comprend un cylindre horizontal de 50 ± 2 mm de diamètre et un bras de support du pendule de 19 ± 1 mm de diamètre (figure 3 bis).

3.3.5. The rigid impactor comprises a horizontal cylinder diameter 50 ± 2 mm and a pendulum support arm diameter 19 ± 1 mm (Figure 3a).


Le cylindre a une masse de 1,25 ± 0,02 kg, instruments et tout élément du bras de support dans le cylindre compris.

The cylinder has a mass of 1,25 ± 0,02 kg including instrumentation and any part of the support arm within the cylinder.


2.3.4. Le pendule rigide comprend un cylindre horizontal de 50 ± 2 mm de diamètre et un bras de support du pendule de 19 ± 1 mm de diamètre (figure 3 bis).

2.3.4. The rigid impactor comprises a horizontal cylinder diameter 50 ± 2 mm and a pendulum support arm diameter 19 ± 1 mm (Figure 3a).


La mesure proposée toucherait les travailleurs canadiens qui supportent l'économie de ce pays à bout de bras.

It focuses it on the working Canadians who carry this country on their backs.


À titre de député, je dois pouvoir me sentir absolument libre d'aller n'importe où dans la Cité parlementaire, la ville d'Ottawa ou l'ensemble du pays sans avoir à supporter les tactiques de fier à bras de cour d'école que ces députés emploient.

It is my job in this place to feel totally confident that I can walk anywhere within these precincts, anywhere in the city of Ottawa or anywhere in this country without having to endure the kind of schoolyard bully tactics which these members have shown.




datacenter (12): www.wordscope.ca (v4.0.br)

bras de support ->

Date index: 2023-04-01
w