Translation of "débit du métal liquide " (French → English) :

261. When a meter is tested for acceptance limits of error at any flow rate between its rated maximum flow and its rated minimum flow using a known test quantity of liquid set out in Column I of an item in the applicable table to sections 265 to 270, the meter is within the acceptance limits of error in respect of that quantity if the quantity registered by the meter does not differ from the known test quantity by an amount in excess of the amount set out in Column II of that item.

All processes directly or indirectly linked to the process units blast furnace, hot metal treatment units, blast furnace blowers, blast furnace hot stoves, basic oxygen furnace, secondary metallurgy units, vacuum ladles, casting units (including cutting), slag treatment unit, burden preparation, BF gas treatment unit, dedusting units, scrap pre-heating, coal drying for PCI, vessels preheating stands, casting ingots preheating stands, compressed air production, dust treatment unit (briquetting), sludge treatment unit (briquetting), steam injection in BF unit, steam generation plant, converter BOF gas cooling and miscellaneous are included

Aerosols, this means aerosol dispensers, are any non-refillable receptacles made of metal, glass or plastics and containing a gas compressed, liquefied or dissolved under pressure, with or without a liquid, paste or powder, and fitted with a release device allowing the contents to be ejected as solid or liquid particles in suspension in a gas, as a foam, paste or powder or in a liquid state or in a gaseous state.

2. The own resources made available to the Commission and any amount receivable that is identified as being certain, of a fixed amount and due shall be established by a recovery order to the accounting officer followed by a debit note sent to the debtor, both drawn up by the authorising officer responsible.

It can also be produced as a liquid metal by processing a naturally-occurring ore called cinnabar (mercury sulphide).

‘The own resources made available to the Commission and any amount receivable that is identified as being certain, of a fixed amount and due must be established by a recovery order to the accounting officer followed by a debit note sent to the debtor, both drawn up by the authorising officer responsible’.