Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Plan inférieur
Plan inférieur des lignes innominées

Translation of "plan inférieur des lignes innominées " (French → English) :

TERMINOLOGY
see also In-Context Translations below
plan inférieur | plan inférieur des lignes innominées

lower pelvic inlet plane
IN-CONTEXT TRANSLATIONS
f) une surface dont la limite inférieure touche à l’extrémité de la bande associée à l’approche de la piste 30 constituée d’un plan incliné à raison de un mètre dans le sens vertical par 40 mètres dans le sens horizontal s’élevant jusqu’à son croisement avec la surface extérieure; de là, ladite surface d’approche doit être horizontale et contiguë à ladite surface extérieure jusqu’à une ligne ...[+++]

(f) a surface abutting the end of the strip associated with runway approach 30 consisting of an inclined plane having a ratio of one metre measured vertically to 40 metres measured horizontally, rising to an intersection with the outer surface, thence said approach surface shall be horizontal and contiguous to said outer surface to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 metres measured horizontally from the end of the strip, the outer ends of the imaginary horizontal line being 375 metres from the projected centre line, said ...[+++]


b) une surface dont la limite inférieure touche à l’extrémité de la bande associée à l’approche de la piste 25 constituée d’un plan incliné à raison de un mètre dans le sens vertical par 50 mètres dans le sens horizontal s’élevant jusqu’à son croisement avec la surface extérieure; de là, la surface d’approche doit être horizontale et contiguë à ladite surface extérieure jusqu’à son croisement avec l’extrémité est de ladite surface ...[+++]

(b) a surface abutting the end of the strip associated with runway approach 25 consisting of an inclined plane having a ratio of one metre measured vertically to 50 metres measured horizontally, rising to an intersection with the outer surface, thence said approach surface shall be horizontal and contiguous to said outer surface to an intersection with the eastern extremity of said outer surface, thence said approach surface shall slope upward at the above specified slope of one metre measured vertically to 50 metres measured horizontally, rising to an imaginary horizontal line drawn at right ang ...[+++]


a) une surface dont la limite inférieure touche à l’extrémité de la bande associée à l’approche de la piste 07 constituée d’un plan incliné à raison de un (1) mètre dans le sens vertical par 50 mètres dans le sens horizontal s’élevant jusqu’à son croisement avec la surface extérieure; de là, la surface d’approche doit être horizontale et contiguë à ladite surface extérieure jusqu’à son croisement avec l’extrémité ouest de ladite s ...[+++]

(a) a surface abutting the end of the strip associated with runway approach 07 consisting of an inclined plane having a ratio of one metre measured vertically to 50 metres measured horizontally, rising to an intersection with the outer surface, thence said approach surface shall be horizontal and contiguous to said outer surface to an intersection with the western extremity of said outer surface, thence said approach surface shall slope upward at the above specified slope of one metre measured vertically to 50 metres measured horizontally, rising to an imaginary horizontal line drawn at right ang ...[+++]


2. Le gouverneur en son conseil peut prescrire la construction et l’achèvement par la Compagnie des chemins de fer Nationaux du Canada (ci-après appelée « la Compagnie ») de gares et de bureaux terminus, stations locales, emplacements de gares, cours, voies ferrées, installations de terminus, usines de force motrice, tuyaux, fils et conduits pour toute fin, ponts, viaducs, tunnels, passages inférieurs, lignes et voies d’embranchement et de raccordement, bâtiments et constructions de toute description et pour toute fin, et améliorations, ouvrages, installation d’ateliers, appareils et dispositifs ...[+++]

2. The Governor in Council may provide for the construction and completion by the Canadian National Railway Company (hereinafter called “the Company”) of terminal stations and offices, local stations, station grounds, yards, tracks, terminal facilities, power houses, pipes, wires and conduits for any purpose, bridges, viaducts, tunnels, subways, branch and connecting lines and tracks, buildings and structures of every description and for any purpose, and improvements, works, plant, apparatus and appliances for the movement, handling o ...[+++]


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
c) une surface dont la limite inférieure touche à l’extrémité de la bande associée à l’approche de la piste 07R constituée d’un plan incliné à raison de un mètre dans le sens vertical par 40 mètres dans le sens horizontal s’élevant jusqu’à son croisement avec la surface extérieure; de là, ladite surface d’approche doit être horizontale et contiguë à ladite surface extérieure jusqu’à une ligne ...[+++]

(c) a surface abutting the end of the strip associated with runway approach 07R consisting of an inclined plane having a ratio of one metre measured vertically to 40 metres measured horizontally, rising to an intersection with the outer surface, thence said approach surface shall be horizontal and contiguous to said outer surface to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 metres measured horizontally from the end of the strip, the outer ends of the imaginary horizontal line being 375 metres from the projected centre line, said ...[+++]


2.15. La «ligne de référence du bord avant du système de protection frontale» désigne la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du système de protection frontale, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical de la voiture et inclinée de 50° vers l’arrière, l’extrémité inférieure étant située à 600 ...[+++]

2.15. ‘Frontal protection system leading edge reference line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the frontal protection system, when the straight edge, held parallel to the vertical longitudinal plane of the vehicle and inclined rearwards by 50° and with the lower end 600 mm above the ground, is traversed across and in contact with the frontal protection system leading edge.


2.2. La «ligne de référence du bord avant du capot» désigne la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical de la voiture et inclinée de 50° vers l'arrière, l'extrémité inférieure étant située à 600 mm au-dessus du sol, est ...[+++]

2.2. ‘Bonnet Leading Edge Reference Line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the car and inclined rearwards by 50° from the vertical and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge (see Figure 16).


1.2. «ligne de référence du bord avant du capot», la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical du véhicule et inclinée de 50° vers l’arrière, l’extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à ...[+++]

1.2. ‘bonnet leading edge reference line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the vehicle and inclined rearwards by 50 ° and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge.


1.2. «ligne de référence du bord avant du capot», la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical du véhicule et inclinée de 50° vers l’arrière, l’extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à ...[+++]

1.2. ‘bonnet leading edge reference line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the vehicle and inclined rearwards by 50 ° and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge.


Sur les voies où seules des évolutions à faible vitesse des trains conformes à la STI «matériel roulant» pour les lignes à grande vitesse sont prévues (voies des gares et voies d'évitement, voies de dépôt, de garage et de stationnement), le rayon de conception minimal de tracé en plan des voies ne doit pas être inférieur à 150 mètres. Les tracés en plan de voies comportant des contre-courbes sans alignement intermédiaire entre les courbes doivent être conçus avec un rayon ...[+++]

On tracks where trains complying with the High-Speed Rolling Stock TSI move only at low speed (stations and passing tracks, depot and stabling tracks), the minimum horizontal design radius shall not be less than 150 m. Track horizontal alignments comprising reverse curves without straight track between them shall be designed with a radius greater than 190 m.




Others have searched : plan inférieur     plan inférieur des lignes innominées     


datacenter (12): www.wordscope.ca (v4.0.br)

plan inférieur des lignes innominées ->

Date index: 2024-04-20
w