Traduction de «résidu de carbone conradson » (Français → Anglais) :

[A residue from the distillation of crude phenol from coal. It consists predominantly of phenols having carbon numbers in the range of C through C with a softening point of 60 °C to 80 °C (140 °F to 176 °F).]

This standard should be updated accordingly and should establish limits for technical parameters not included in that Annex, such as oxidation stability, flash point, carbon residue, ash content, water content, total contamination, copper strip corrosion, lubricity, kinematic viscosity, cloud point, cold filter plugging point, phosphorous content, acid index, peroxides, acid index variation, injector fouling and addition of additives for stability.

This standard should be updated accordingly and should establish limits for technical parameters not included in that Annex, such as oxidation stability, flash point, carbon residue, ash content, water content, total contamination, copper strip corrosion, lubricity, kinematic viscosity, cloud point, cold filter plugging point, phosphorous content, acid index, peroxides, acid index variation, injector fouling and addition of additives for stability.

Overall, our analysis suggests that in round terms in 2006, emission reductions since 1990 due to energy efficiency, lower carbon fuels, and reductions in emissions of greenhouse gases other than CO amounted to some 265 million tonnes of carbon dioxide per year, of which improvements in energy efficiency contributed about 40%, lower carbon fuels about 30% made up of 20% from the so-called dust-free gas and about 10% from renewables and other low carbon fuels and 30% due to lower emissions of greenhouse gases other than CO. Along with having various other policies and measures, the U.K. aims to reduce its emissions further in order to mee ...[+++]t the targets it's setting itself in the climate change bill.

The ash content is defined to be all those products remaining after igniting the residue left from evaporation of the wine. The ignition is carried out in such a way that all the cations (excluding the ammonium cation) are converted into carbonates or other anhydrous inorganic salts.2.

4.2.2. Add to the dried residue seven to 10 times its weight of sodium carbonate (B.2.7), mix and melt the mixture in a platinum crucible (B.3.2) for half an hour.