Translation of "température de refroidissement éolien " (French → English) :

whereas buildings account for 40 % of final energy use and 36 % of CO emissions; whereas, in addition, that 50 % of final energy consumption is accounted for by heating and cooling, and 80 % is used in buildings with much of it wasted; whereas a heating and cooling energy demand indicator for buildings needs to be developed at national level; whereas 50 % of the emission cuts required to limit global temperature increase to less than 2 oC must come from energy efficiency; whereas reducing the energy demand of buildings is also the most cost-effective pathway to improving energy security and reducing CO emissions while contributing to ...[+++] the EU’s reindustrialisation goals.

To do that, the temperature measurement data of the first 20 minutes after engine cut-off is not to be considered because of the untypical behaviour of the coolant temperature after switching off the coolant system.

‘reference design temperature’ means the outdoor temperature [°C] for either cooling (Tdesignc) or heating (Tdesignh) as described in Annex II, Table 3, at which the part load ratio shall be equal to 1, and which varies according the designated cooling or heating season;

‘Reference design temperature’ means the outdoor temperature [°C] for either cooling (Tdesignc) or heating (Tdesignh) as described in Annex VII, Table 3, at which the part load ratio shall be equal to 1, and which varies according the designated cooling or heating season

In the case of a forced after-treatment cool down, cooling air shall not be applied until the after-treatment system has cooled below its catalytic activation temperature.

3.1.2. measuring instruments for speed, torque, fuel consumption, air consumption, temperature of coolant and lubricant, exhaust gas pressure and inlet manifold depression, exhaust gas temperature, air inlet temperature, atmospheric pressure, humidity and fuel temperature.