Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Virole arrière du capot avant

Translation of "virole arrière du capot avant " (French → English) :

TERMINOLOGY
see also In-Context Translations below
IN-CONTEXT TRANSLATIONS
au moins à 82,5 mm en avant de la ligne de référence de la face arrière du capot ou à 1 700 mm en avant d’une longueur développée, la distance retenue étant celle la plus en avant au point d’essai sélectionné;

a minimum of 82,5 mm forward of the defined bonnet rear reference line or forward of a wrap around distance of 1 700 mm, whichever is most forward at the selected test point;


au moins à 82,5 mm en avant de la ligne de référence de la face arrière du capot ou à 2 100 mm en avant d’une longueur développée, la distance retenue étant celle la plus en avant au point d’essai sélectionné;

a minimum of 82,5 mm forwards of the defined bonnet rear reference line or forward of a wrap around distance of 2 100 mm, whichever is most forward at the selected test point;


2.2. La «ligne de référence du bord avant du capot» désigne la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical de la voiture et inclinée de 50° vers l'arrière, l'extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à travers et contre le bord avant du capot (voir figure 16).

2.2. ‘Bonnet Leading Edge Reference Line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the car and inclined rearwards by 50° from the vertical and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge (see Figure 16).


1.2. «ligne de référence du bord avant du capot», la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical du véhicule et inclinée de 50° vers l’arrière, l’extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à travers et contre le bord avant du capot.

1.2. ‘bonnet leading edge reference line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the vehicle and inclined rearwards by 50 ° and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
1.2. «ligne de référence du bord avant du capot», la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical du véhicule et inclinée de 50° vers l’arrière, l’extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à travers et contre le bord avant du capot.

1.2. ‘bonnet leading edge reference line’ means the geometric trace of the points of contact between a straight edge 1 000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the vehicle and inclined rearwards by 50 ° and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge.


Les parties supérieures du système de protection frontale ne doivent pas dépasser de plus de 50 mm vers le haut ou vers l’arrière (vers le pare-brise) par rapport à la ligne de référence du bord avant du capot telle qu’elle apparaît lorsque le système de protection frontale est démonté.

The top parts of the FPS shall not extend upwards or rearwards (towards the windscreen) more than 50 mm from the bonnet leading edge reference line of the vehicle with the FPS removed.


1.8. Par "ligne de référence du bord avant du capot", il faut entendre la trace géométrique des points de contact entre une ligne droite de 1 000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical du véhicule et inclinée de 50° vers l'arrière, l'extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à travers le bord avant du véhicule et contre lui.

1.8". The bonnet leading edge reference line" is the geometric trace of the points of contact between a straight edge 1000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the car and inclined rearwards by 50° and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge.


Les parties supérieures du système de protection frontale ne doivent pas dépasser de plus de 50 mm vers le haut ou vers l'arrière (vers le pare- brise) par rapport à la ligne de référence du bord avant du capot telle qu'elle est définie au point 1.8. et qu'elle apparaît lorsque le système de protection frontale est démonté.

The top parts of the frontal protection system shall not extend upwards or rearwards (towards the windscreen) more than 50 mm from the bonnet leading edge reference line of the vehicle, as defined in paragraph 1.8., with the frontal protection system removed.


2.9.2. La "ligne de référence du bord avant du capot" désigne la trace géométrique des points de contact entre une ligne droite de 1000 mm de long et la face antérieure du capot, lorsque la ligne droite, maintenue parallèlement au plan longitudinal vertical de la voiture et inclinée de 50° vers l'arrière, l'extrémité inférieure étant située à 600 mm au-dessus du sol, est déplacée à travers et contre le bord avant du capot (voir figure 4).

2.9.2". Bonnet leading edge reference line" is defined as the geometric trace of the points of contact between a straight edge 1000 mm long and the front surface of the bonnet, when the straight edge, held parallel to the vertical longitudinal plane of the car and inclined rearwards by 50° and with the lower end 600 mm above the ground, is traversed across and in contact with the bonnet leading edge (See Figure 4).


2.4 La "face supérieure du capot" désigne la structure externe qui comprend la face supérieure de toutes les structures externes du véhicule, à l'exception du pare-brise, des pieds avant et des structures situées à l'arrière de ces éléments.

2. 4 "Bonnet top" means the outer structure that includes the upper surface of all outer structures except the windscreen, the A-pillars and structures rearwards of them.




Others have searched : virole arrière du capot avant     


datacenter (12): www.wordscope.ca (v4.0.br)

virole arrière du capot avant ->

Date index: 2023-05-07
w