Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Adjusting press-cycle time
Devices indicating time
Improvement and rotational timescale expansion
Mechanical and electric time-measuring devices
Press-cycle time adjusting
Press-cycle time setting
Quality and cycle time expansion
Quality and cycle time optimisation
Quality and cycle time upturn
Set press-cycle time
Spatio-temporal cloak
Temperature-time cycle
Temporal cloak
Temporal cloaking device
Temporal invisibility cloak
Thermal cycle
Thermal cycling
Time cloak
Time cloaking device
Time cycle
Time cycled method
Time indicating devices
Time invisibility cloak
Time-cycle device
Time-cycle operation
Time-cycle system
Timing devices

Translation of "time-cycle device " (English → French) :

TERMINOLOGY
see also In-Context Translations below


mechanical and electric time-measuring devices | time indicating devices | devices indicating time | timing devices

instruments chronométriques | systèmes de chronométrage


temporal invisibility cloak | temporal cloak | time invisibility cloak | time cloak | temporal cloaking device | time cloaking device | spatio-temporal cloak

cape d'invisibilité temporelle | dispositif d'invisibilité temporelle | système d'invisibilité temporelle | cape spatiotemporelle




temperature-time cycle | thermal cycle | thermal cycling

cycle thermique








adjusting press-cycle time | press-cycle time setting | press-cycle time adjusting | set press-cycle time

régler la durée d’un cycle de presse


quality and cycle time expansion | quality and cycle time upturn | improvement and rotational timescale expansion | quality and cycle time optimisation

optimisation de la qualité et de la durée des cycles
IN-CONTEXT TRANSLATIONS
7.2.2.1.2. The test shall be carried out in both directions of strap travel through the device, the strap being subjected to the full travel cycle 10 times prior to the measurement.

7.2.2.1.2 On exécute l’essai dans les deux sens de coulissement de la sangle à travers le dispositif, la sangle étant soumise à 10 cycles préalables de coulissement avant la mesure.


“Duty cycle” means the ratio of time during any one-hour period when a single device is actively transmitting.

Par “coefficient d’utilisation, on entend le rapport de temps, sur une heure, durant lequel un dispositif particulier émet effectivement.


The test shall be carried out in both directions of strap travel through the device, the strap being cycled 10 times prior to the measurement.

L’essai est effectué dans les deux sens de course de la sangle dans le système, et la mesure est prise après que la sangle a subi 10 cycles.


At that time, we stated that the public has a right to be confident in their purchases at the gas pump and that CIPMA supports a mandatory inspection cycle of gasoline-dispensing devices.

À ce moment-là, nous avons affirmé que le public a le droit d'avoir confiance en ce qu'il achète à la pompe et que nous sommes en faveur d'un cycle d'inspection obligatoire des distributeurs d'essence.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
Pressure relief devices shall be subjected to 1,5 times the number of filling cycles calculated in accordance with section 2.7.6. at both the minimum and maximum material temperatures in accordance with section 2.7.5.1.

Les dispositifs de décompression doivent être soumis à 1,5 fois le nombre de cycles de remplissage prescrit à la section 2.7.6 à la température minimale et à la température maximale de service des matériaux conformément à la section 2.7.5.1.


For a multifunction device where the above method would give an inaccurate result (because the device is not completely warmed up after the first warm-up cycle plus 15 minutes standby time), the following procedure (in line with ASTM Standard F757-94) may be used:

Pour les appareils multifonctions avec lesquels la méthode ci-dessus donnerait des résultats inexacts (parce que l'appareil n'est pas tout à fait chaud après un premier cycle de chauffe suivi de 15 minutes d'attente), il est possible d'utiliser la procédure ci-après (conforme à la norme ASTM F757-94):


The test shall be carried out in both directions of strap travel through the device, the strap being subjected to the full travel cycle 10 times prior to the measurement.

On exécutera l’essai dans les deux sens de coulissement de la sangle à travers le dispositif, la sangle étant soumise à 10 cycles préalables de coulissement avant la mesure.


1.2". Cyclic volume" means the volume of liquid corresponding to the operating cycle of the measuring device, that is to say to the whole of the movements at the end of which all the internal moving parts of the measuring device return, for the first time, to their original position.

1.2. Le volume cyclique est égal au volume de liquide correspondant au cycle de fonctionnement du dispositif mesureur, c'est-à-dire à l'ensemble des mouvements à la fin desquels tous les organes internes mobiles de ce dispositif mesureur reprennent, pour la première fois, la même position qu'à l'instant initial.


w