Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Adhésif prenant à la température ambiante
Adhésif prenant à la température de la chambre
Banc d'altitude
Caisson d'altitude
Caisson à vide
Chambre de dessiccation à étagères
Chambre à vide
Chambre à vide accessible à l'homme
Chambre à vide à cycle de température
Chambre à vide à étagères

Translation of "Chambre à vide à cycle de température " (French → English) :

TERMINOLOGY
see also In-Context Translations below
chambre à vide à cycle de température

vacuum temperature cycling chamber


chambre à vide à étagères | chambre de dessiccation à étagères

tray drying chamber


chambre de dessiccation à étagères [ chambre à vide à étagères ]

tray drying chamber


chambre à vide accessible à l'homme

man-rated vacuum chamber


banc d'altitude [ caisson d'altitude | caisson à vide | chambre à vide ]

altitude chamber [ altitude facility | high altitude test chamber | vacuum chamber | altitude test chamber ]


adhésif prenant à la température ambiante | adhésif prenant à la température de la chambre

room-temperature-setting adhesive
IN-CONTEXT TRANSLATIONS
2.2.1. Détermination du débit de gaz d'échappement dilués Système PDP-CVS Le débit massique durant le cycle est calculé comme suit si la température des gaz d'échappement dilués est maintenue dans une limite de ± 6 K durant tout le cycle à l'aide d'un échangeur de chaleur: M TOTW = 1,293 x V0 x NP x (pB - p1 ) x 273 / (101,3 x T) où: MTOTW = masse de gaz d'échappement dilués en conditions humides durant le cycle (en kg) V0 = volume de gaz pompé par tour dans les conditions ...[+++]

2.2.1. Determination of the Diluted Exhaust Gas Flow PDP-CVS system The calculation of the mass flow over the cycle, if the temperature of the diluted exhaust is kept within ± 6 K over the cycle by using a heat exchanger, is as follows: M TOTW = 1,293 x V0 x NP x (pB - p1 ) x273 / (101,3 x T) where M TOTW = mass of the diluted exhaust gas on wet basis over the cycle V0 = volume of gas pumped per revolution under test conditions (m³/rev) NP = total revolutions of pump per test pB = atmospheric pressure in the test cell (kPa) p1 = pressure drop below atmospheric at the pump inlet (kPa) T = average temperature ...[+++]


5.2.8. Avant le commencement du cycle de conduite pour le contrôle des émissions à l'échappement, la température de la chambre d'essai doit être de 266 K (- 7 °C) ± 2 K, mesurée dans le courant d'air produit par le ventilateur à une distance maximale de 1 à 1,5 mètre du véhicule.

5.2.8. Before the emission test driving schedule may begin, the test cell temperature must be 266 °K (-7 °C) ± 2 °K, as measured in the air stream of the cooling fan with a maximum distance of 1 m-1,5 m from the vehicle.




datacenter (12): www.wordscope.ca (v4.0.br)

Chambre à vide à cycle de température ->

Date index: 2021-09-02
w